-
N. Bader, F. Pape, H. H. Gatzen, G. Poll
(2015):
Examination of friction and wear of a 100Cr6 ball against a bearing ring in a micro-pin-on-disk tester,
WIT Transactions on Engineering Sciences, Vol 91: 57 - 68
DOI:
10.2495/SECM150051
-
H.H. Gatzen, T. Griesbach, M. C. Wurz, L. Rissing
(2011):
Considerations on Ultra-thin Substrateless
Micro and Nano Systems,
Proc. ASME2011 & Exp. IMECE2011, Denver, CO, USA, 2011
-
A. Wienecke, C. Ruffert, H.H. Gatzen
(2010):
A Programm to Attract Females to Hightech Fields like
Nanotechnology and Optics,
Proc. CD, IAMOT 2010, Cairo, Egypt, 2010
-
B. Spasova, H.H. Gatzen
(2010):
Simulation of an Improved Microactuator with Discrete MSM
Elements,
Materials Science Forum Vol. 635, pp. 181-186, Trans Tech Publications,
Switzerland, 2010
-
B. Spasova, M. C. Wurz, C. Ruffert, J. Norpoth, Ch. Jooss, H.H. Gatzen
(2010):
Using Magnetooptical
Measurements for the Evaluation of a Hybrid Magnetic Shape Memory (MSM) Based Microactuator,
Transactions on Magnetics, Vol. 46, Issue 6, pp. 2256-2259, 2010
-
D. Dinulovic, C. Ruffert, H. Saalfeld, H.H. Gatzen
(2010):
Evaluation of a Slider with an Integrated
Magnetic Mircroactuator Using Laser Doppler Vibrometry,
Proc. 12th Int. Conf. on New
Actuators 2010, Bremen, Germany, pp. 774-777, 2010
-
D. Hoheisel, C. Leng, H.H. Gatzen
(2010):
Design, Modeling and Fabrication Sequence of a
Ferrofluidic Microactuator,
Proc. 12th Int. Conf. on New Actuators 2010, Bremen, Germany, pp.
361-364, 2010
-
D. Hoheisel, S. Cvetkovic, W. Kurniawan, E. Obermeier, H.H. Gatzen
(2010):
System Integration
Challenges for a Slider with an Integrated Microactuator,
Transactions on Magnetics, Vol. 46,
Issue 6, pp. 2163-2166, 2010
-
F. Klocke, H.H. Gatzen, S. Kamenzky, O. Traisigkhachol, J. Dieckmann, M. Garzon
(2010):
Micro
Electro Discharge Machining (μEDM) with Novel Tool Electrodes,
Proc. 16th ISEM 2010, Press
Shanghai Jiaotong University Press, ISBN 9787313056306, pp.577-582, Shanghai, China,
2010
-
F. Pape, L. Rissing, H.H. Gatzen
(2010):
Fabrication and Tribological Investigation of Fullerene
C60/C70 Reinforced Epoxy Resin SU-8TM,
Tagungsband, Tribologie-Fachtagung, Göttingen,
Germany, 2010
-
H.H. Gatzen
(2010):
Electromagnetic Micro and Nano Actuators,
Proc. 12th Int. Conf. on New
Actuators 2010, Bremen, Germany, pp.346-351, 2010
-
H.H. Gatzen, P. Freitas, E. Obermeier, J. Robertson
(2010):
Second Stage Actuation for Hard Disc
Drives through MEMS Technology,
IEEE Transactions on Magnetics, Vol. 46, No. 3, pp. 782-
789, 2010
-
M. C. Wurz, C. Ruffert, H.H. Gatzen
(2010):
Methodology for Concurrent Nano-Engineering. Proc.
CD, IAMOT 2010, Cairo, Egypt, 2010,
Proc.
CD, IAMOT 2010, Cairo, Egypt, 2010
-
O. Traisigkhachol, H. Schmid, M. C. Wurz, H.H. Gatzen
(2010):
Applying SU-8TM to the Fabrication
of Micro Electro Discharge Machining Electrodes,
Microsystem Technologies, Springer Verlag,
Berlin, Heidelberg, New York, Vol. 16, No. 8-9, pp. 1445-1450, 2010
-
O. Traisigkhachol, H.H. Gatzen
(2010):
High Aspect Ratio Micromolds for the Electroplating of Micro
Electro Discharge Machining Tools,
Microsystem Technologies, Springer Verlag, Berlin,
Heidelberg, New York, Vol. 16, No. 8-9, pp. 1377-1383, 2010
-
O. Traisigkhachol, H.H. Gatzen
(2010):
Fabrication of Electroplated Cu Tool Electrodes for μ-EDM
using a Si Micromold,
Proc. EUSPEN 2010, Delft, The Netherlands, pp. 355-358, 2010
-
S. Cvetkovic, F. Pape, H.H. Gatzen
(2010):
Creating Solid State Micro Joints through Micro
Machining,
Proc. EUSPEN 2010, Delft, The Netherlands, pp. 189-192, 2010
-
S. Hansen, J. Norpoth, Ch. Jooss, L. Rissing, H.H. Gatzen
(2010):
Magneto-optical Characterization
of the Stator of a Variable Reluctance (VR) Micro Step Motor,
Proc. 12th Int. Conf. on New
Actuators 2010, Bremen, Germany, pp. 706-709, 2010
-
S. Hansen, Z. Celinski, H.H. Gatzen
(2010):
Optimization of the Magnetic Performance of a Linear
Variable Reluctance (VR) Micro Step Motor,
Digests, 11th Joint MMM-Intermag Conf. 2010,
Washington, DC, USA, 2010
-
T. Creutzburg, H.H. Gatzen
(2010):
Mechanical and Thermal Simulations of a Microactuator for the
Simulation of the Perilymph,
Proc. CD, EuroSimE 2010, Bordeaux, France, 2010
-
T. Creutzburg, H.H. Gatzen
(2010):
Simulations of an Electromagnetic Microsystem used in
Biomedical Applications,
Proc. CD, Piers 2010, Xi’an, China, 2010
-
E. Flick, K. Feindt, H.H. Gatzen
(2009):
Mikro-Hysteresemesssensor zur Vermessung anisotroper Dünnfilme. Micro Hysteresis Sensor for Measuring Anisotropic Thin-Films,
Proc. MST-Kongress 2009, Berlin, Deutschland, S. 389-392
-
E. Flick, V. Saile, H.H. Gatzen
(2009):
A Pladoyer for a Concurrent Nano Engineering,
Proc. COMS 2009, 14th Ann. Meet., Conf. CD, Copenhagen, Denmark
-
E. Flick, W.Z. Li, G. Steinhoff, H.H. Gatzen
(2009):
Controlling Nanoparticle Complexes in Gene Delivery Applications,
Book of Abstracts, 1st Symposium of the SFB/TR 37, Aachen, Germany, pp.30
-
F. Klocke, H.H. Gatzen, S. Kamenzky, M. Garzon, O. Traisigkhachol
(2009):
Application of Electroplated Electrodes in Micro Electro Discharge Machining (EDM),
Proc. euspen 9th Int. Conf. 2009, San Sebastian, Spain, Vol. 2, pp. 471-474
-
F. Pape, H.H. Gatzen
(2009):
Evaluation of a Concept for Professional Improvement by Study in Engineering Sciences,
Proc. IAMOT, 18th Int. Assoc. for Manag. of Tech., Orlando, Fl., USA, Conf. CD, ISBN 0-9815817-2-2
-
F. Pape, H.H. Gatzen
(2009):
Resistance of Multilayer Diamond-like Carbon (DLC) Coatings for MEMS Applications against Oscillating Wear,
Proc. WTC 09, Kyoto, Japan, G-114, pp.112
-
F. Pape, T. Creutzburg, O. Traisigkhachol, H.H. Gatzen
(2009):
Dünnfilmtechnische Herstellung eines rotierenden Synchronmotors. Thin-film Fabrication of a Rotating Synchronous Motor,
Proc. MST-Kongress 2009, Berlin, Deutschland, S. 828-831
-
H. Saalfeld, D. Dinulovic, H.H. Gatzen
(2009):
Aktivteil eines Schreib-/Lesekopfes mit integriertem Mikroaktor (SLIM) für Festplattenspeicher. Active Part of a Read/Write Head with an Integrated Microactuator for Hard Disc Drives (HDD),
Proc. MST-Kongress 2009, Berlin, Deutschland, S. 262-265
-
H.H. Gatzen, C. Ruffert
(2009):
Magnetic Micro Sensor Activities at the Leibniz University Hanover,
Sensor und Test 14th Int. Conf. 2009, Nuremberg, Germany, Vol. 2, A6.4, pp. 35-40, ISBN 978-3-9810993-5-5
-
H.H. Gatzen, C. Ruffert, M.C. Wurz, E. Flick
(2009):
Magnetische Mikrosysteme für Wandleranwendungen. Magnetic Micro Electro-mechanical Systems (MEMS) for Transducer Applications,
Proc. MST-Kongress 2009, Berlin, Deutschland, S.425-428
-
H.H. Gatzen, S. Cvetkovic
(2009):
Cross Crown Nanogrinding of a Chiplet for a Slider with an integrated Microactuator (SLIM),
Proc. ASPE, 24th Ann. Meet. 2009, Monterey, CA, USA, pp. 95
-
I. Peshekhodov, F. Pape, S. Cvetkovic, H.H. Gatzen, B.-A. Behrens
(2009):
Investigation of the Mechanical Response of a Polyurethane-based Coil Coatings System with the Help of Instrumented Indentation and FE Analysis,
Proc. Int. Symposium on Plasticity and its Current Applications, St. Thomas, Virgin Islands, USA, pp. 55-57, ISBN 0-9659463-9-8
-
M. Bedenbecker, H.H. Gatzen
(2009):
Investigations on the Permeability of soft magnetic Micro Structures,
Book of Abstracts, SMM 19, Torino, Italy, G3-01
-
M. Gatzen, F. Pape, H.H. Gatzen, G. Poll
(2009):
Frictional Investigations on Ball Bearings Lubricated Using Greases with Polymer Additives,
Proc. WTC 09, Kyoto, Japan, B2-414, pp. 812
-
M.C. Wurz, F. Pape, M. Wark, H.H. Gatzen
(2009):
Investigation of Fluidic Additives on the Nanohardness During Polishing,
Proc. WTC 09, Kyoto, Japan, K-331, pp. 698
-
S. Cvetkovic, B. Spasova, H.H. Gatzen
(2009):
Challenges in Assembling a Magnetic Shape Memory (MSM) Microactuator,
Proc. ASPE 24th Ann. Meet. 2009, Monterey, CA, USA, pp. 431-434
-
S. Cvetkovic, D. Miletic, H.H. Gatzen
(2009):
Relationship between Removal Rate and Friction Force of a CMP Process for MEMS,
Proc. euspen 9th Int. Conf. 2009, San Sebastian, Spain, Vol. 2, pp. 499-502
-
S. Cvetkovic, H.H. Gatzen
(2009):
Evaluation of a Prototype CMP Machine for Improving the Global Planarization by MEMS,
Proc. ASPE, 24th Ann. Meet. 2009, Monterey, CA, USA, pp. 315-318
-
S. Cvetkovic, H.H. Gatzen
(2009):
Technology Development for the Thinning of a Slider with an Integrated Microactuator,
Proc. euspen 9th Int. Conf. 2009, San Sebastian, Spain, Vol. 2, pp. 455-458
-
S. Hansen, S. Bütefisch, H.H. Gatzen
(2009):
Design, Fertigung und messtechnische Untersuchungen eines Mikroreluktanzaktors. Design, Fabrication and Characterization of a Variable Reluctance Micro Actuator,
Proc. MST-Kongress 2009, Berlin, Deutschland, S. 840-843
-
S. Hansen, Z. Celinski, H.H. Gatzen
(2009):
Influence of Vertical Magnetized MnBi Layers on the Permeability of Permalloy Structures,
Book of Abstracts, SMM 19, Torino, Italy, F1-11
-
T. Mäder, D. Weber, A. Belski, H.H. Gatzen, B. Wielage
(2009):
Analyses of Sensor Films on a Carbon Fibre,
Proc. (CD), B8.13, 17th Int. Conf. on Composite Materials (ICCM), Edinburgh, United Kingdom
-
W.Z. Li, W.W. Wang, E. Delyagina, A. Kaminski, N. Ma, G. Steinhoff, E. Flick, M.C. Wurz, H.H. Gatzen, X.S. Gao, M. Alexe, D. Hesse
(2009):
Magnetic Polymer Nanoparticles in Gene Delivery Applications,
Book of Abstracts, 1st Symposium of the SFB/TR 37, Aachen, Germany, pp. 3
-
A. Belski, W. Kammrath, H.H. Gatzen
(2008):
Focused Ion Beam Fiber Turning Lathe for Fabricating a Strain Gauge for Carbon Fibers,
Proc. euspen 8th Int. Conf. 2008, Zurich, Switzerland, Vol. 2, pp. 129-133
-
B. Spasova, D. Dinulovic, H.H. Gatzen
(2008):
An Iterative Approach to Simulate Magnetic Micro Systems by Changing Magnetic Properties,
Proc. Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2008, Freiburg, Germany, pp.213-216
-
B. Spasova, M.C. Wurz, H.H. Gatzen
(2008):
Fabrication and Characterization of Microactuators with Discrete MSM Bulk Material,
Proc. 11th Int. Conf. on new Actuators 2008, Bremen, Germany, pp. 713-716
-
D. Dinulovic, H. Saalfeld, Z. Celinski, S. Field, H.H. Gatzen
(2008):
Evaluation of an Electro-magnetic Micro Actuator Using Scanning Hall Probe Microscopy Measurements,
53rd Conf. on Magnetics and Magn. Materials, Austin, TX, USA, Abstracts, FE-10
-
D. Dinulovic, H.H. Gatzen
(2008):
An Approach for Simulating Magnetic Microactuators,
Proc. of International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2008, Freiburg, Germany, pp.217-220
-
D. Miletic, S. Cvetkovic, C.-T. Weber, H.H. Gatzen
(2008):
Tribological Investigation of CMP for Electroplated NiFe Microstructures,
Proc. euspen 8th, Int. Conf. 2008, Zurich, Switzerland, Vol. 1, pp. 138-142
-
E. Flick, H.H. Gatzen
(2008):
Total Quality Management (TQM) Challenges for Incoming and Outgoing Goods in a University Micro Technilogy Fabrication Line,
Proc. IAMOT 2008, 17th Int. Assoc. for Manag. of Tech., Conf. CD, Dubai, UAE
-
E. Flick, K. Feindt, H.H. Gatzen
(2008):
Micro Hysteresis Sensor for Wafer Level Testing of Magnetic Films,
Intermag, Conf. 2008, Madrid, Spain, BC-04
-
F. Pape, C. Ruffert, H.H. Gatzen
(2008):
Professional Improvement by Study in Engineering Sciences,
Proc. IAMOT 2008, 17th Int. Assoc. for Manag. of Tech., Conf. CD, Dubai, UAE
-
F. Pape, H.H. Gatzen
(2008):
Optimization of the Adhesion of Diamond-like Carbon on Glass Substrates for Microelectro Mechanical Systems by Nanoindentational Studies,
Leeds-Lyon Symposium on Tribology 2008, Leeds, UK
-
F. Pape, H.H. Gatzen
(2008):
A Management Concept of Competencies Improvement for Students with Prior Vocational, Advanced Education, and Work Experience in Technical Fields,
Proc. Picmet, Vol. 2: "Technology Management for a Sustainable Economy." Cape Town, South Africa, Conf. CD
-
G. Janssen, O. Traisigkhachol, H.H. Gatzen, B. Ponick
(2008):
Design and Fabrication of a Rotary Micro Synchronus Motor,
Proc. 11th Int. Conf. on New Actuators 2008, Bremen, Germany, pp. 457-460
-
H.H. Gatzen
(2008):
Magnetic Micro Electro-Mechanical Systems (MEMS) for Sensor and Actuator Applications,
PRiME 2008 Meeting, Honolulu, HI, USA, The Electrochemical Society, MA 2008-2, Abs. 2601.pdf
-
H.H. Gatzen, E. Flick, V. Saile
(2008):
A Management of Technology (MOT) Concept for Handling Disruptive Technologies,
Proc. COMS 2007, Melbourne, Australia, Conf. CD
-
H.H. Gatzen, F. Klocke, S. Kamenzky, O. Traisigkhachol
(2008):
Electroplated Cu Micro Electrode for Application in Micro Electrostatic Discharge Machining (EDM),
PRiME 2008 Meeting, Honolulu, HI, USA, The Electrochemical Society, MA 2008-2, Abs. 2604.pdf
-
H.H. Gatzen, H. Gerdes, D. Miletic
(2008):
Electromagnetic Dual-position Microactuator for Measurement Applications,
Proc. 11th Int. Conf. on new Actuators 2008, Bremen, Germany, pp. 774-777
-
H.H. Gatzen, Paulo J.P. de Freitas, E. Obermeier, J. Robertson
(2008):
A Slider with an Integrated Microactuator (SLIM) for Second Stage Actuation in Hard Disc Drives,
Intermag, Conf. 2008, Madrid, Spain, DF-05
IEEE Trans. on Magn., Vol. 44, No. 11, pp. 3730-3733
-
H.H. Gatzen, T. Griesbach, V. Saile
(2008):
A Concept for Complementary Micro NanoTechnology Education in Universities,
Proc. COMS 2007, Melbourne, Australia,Conf. CD
-
J. Chen, S. Hansen, H.H. Gatzen
(2008):
Long Term Investigations on NiFe Electroplating Process,
PRiME 2008 Meeting, Honolulu, HI, USA, The Electrochemical Society, MA 2008-2, Abs. 2584.pdf
-
K.-H. Wu, E. Gastan, M. Rodman, Fr.-W. Bach, B.-A. Behrens, H.H. Gatzen
(2008):
Development of Magnetic Magnesium for Data Storage in Gentelligent Products,
JEMS 2008, Dublin, Ireland (submitted)
-
K.-H. Wu, H.H. Gatzen
(2008):
Development of a System for Data Storage on Machine Components ,
Proc. (CD), I PROMS 2008, the 4th Virtual Conf. of the EU-funded FP6 I PROMS Network of Excellence on Innovative Production Machines and Systems, pp. 454-459, Wales, UK
-
K.-H. Wu, H.H. Gatzen
(2008):
Fabrication and Assembly of a Magnetic Recirding Head,
Proc. euspen 8th Int. Conf. 2008, Zurich, Switzerland, Vol. 2, pp. 143-147
-
K.-H. Wu, R. Schäfer, H.H. Gatzen
(2008):
Investigations on a Permalloy Keeper Layer for the Readout of Magnetically Stored Data based on the Magneto-optical Kerr Effect,
53rd Conf. on Magnetics and Magn. Materials, Austin, TX, USA, Abstracts, BG-10
-
K.-H. Wu, S. Cvetkovic, H.H. Gatzen
(2008):
Dicing Process Optimization for Sapphire and Altic,
Proc. euspen 8th Int. Conf. 2008, Zurich, Switzerland, Vol. 1, pp. 121-125
-
M. Bedenbecker, H.H. Gatzen
(2008):
Investigations on the Permeability of Thin-Film Soft Magnetic Structures,
53rd Conf. on Magnetics and Magn. Materials, Austin, TX, USA, Abstracts, FE-10
-
M. Wurz, D. Dinulovic, J. Chen, E. Flick, K. Bade, V. Saile, H.H. Gatzen
(2008):
Design of Experiment (DOE) for Optimizing a NiFe 45/55 Electroplating Process,
PRiME 2008 Meeting, Honolulu, HI, USA, The Electrochemical Society, MA 2008-2, Abs. 2583.pdf
-
M. Wurz, T. Oeckermann, P. Wagner, C. Ruffert, J. Caro, H.H. Gatzen
(2008):
Investigations on Embedding Nanoparticles by Electroplating,
PRiME 2008 Meeting, Honolulu, HI, USA, The Electrochemical Society, MA 2008-2, Abs. 2595.pdf
-
O. Traisigkhachol, L. Rissing, H.H. Gatzen
(2008):
A Concept for Characterization and Analysis of the readout of Soft Magnetic Thin-Films,
PRiME 2008 Meeting, Honolulu, HI, USA, The Electrochemical Society, MA 2008-2, Abs. 2605.pdf
-
S. Cvetkovic, H. Saalfeld, H.H. Gatzen
(2008):
Dicing Process for the Device Separation of a Slider with an Integrated Microactuator (SLIM),
Proc. ASPE 23rd Ann. Meet. 2008 and 12th ICPE, Portland, OR, USA, pp. 380-383
-
T. Griesbach, L. Rissing, H.H. Gatzen
(2008):
Integration of a Temperature Sensor into a Modular, Multifunctional Micro Sensor Family,
Proc. (CD), I PROMS 2008, the 4th Virtual Conference, of the EU-funded FP6 I PROMS Network of Excellence on Innovative Production Machines and Systems, pp. 472-476, Wales, UK
-
A. Neumeister, R. Himmelhuber, C. Materlik, T. Temme, F. Pape, H. H. Gatzen, A. Ostendorf
(2007):
Three-dimensional Micro Fabrication of Mechanical Systems Using Layer Based Stereo Lithography,
Proc. 8th LPM 2007, Vienna, Austria
-
C. Ruffert, H.H. Gatzen
(2007):
Design and Technology of a Magnetic Levitation System for Linear Micro Actuators,
Proc. ASME 2007, Las Vegas, NV, USA, DETC2007-34676, ISBN 0-7918-3806-4
-
C. Ruffert, H.H. Gatzen
(2007):
Alternatives for Fabricating Aerostatic Micro Guides,
Proc. Smart Systems Integration 2007, European Conference & Exhibition on integration issues of miniaturized systems – MEMS, MOEMS, ICs and electronic components, Paris, France, pp. 604-607
-
C. Ruffert, H.H. Gatzen
(2007):
Miniaturized Cryoprobe for the Local Deactivation of Neural Networks,
Proc. EUSPEN 7th Int. Conf. 2007, Bremen, Germany, Vol. 1, pp. 73-77
-
C. Ruffert, M. Feldmann, A. Waldschick, S. Büttgenbach, H.H. Gatzen
(2007):
Fertigung von Anrtiebs- und Führungskomponenten für Mikromotoren,
Kolloquium Mikroproduktion, Forschungzentrum Karlsruhe GmbH, Karlsruhe, Deutschland, S. 165-170
-
E. Flick, H.H. Gatzen
(2007):
A Study on Determining of the Current and Future Need for Specialists in High Technology Industries,
Book of Abstracts and Proc. 16th Int. Assoc. for Manag. of Tech. IAMOT 2007, Miami, Florida, USA
-
F. Pape, D. Miletic, H.H. Gatzen
(2007):
Recognition of Professional Qualifications for University Students in Engineering Sciences,
Book of Abstract. 16th Int. Assoc. for Manag. of Tech. IAMOT 2007, Miami, FL, USA
-
F. Pape, H.H. Gatzen
(2007):
Stress, Friction and Life in Micro Actuator Contact Surfaces,
Leeds-Lyon Symposium on Tribology 2007, France
-
H.H. Gatzen, P.J.P. de Freitas, E. Obermeier, J. Robertson
(2007):
A Slider with an Integrated Microactuator (SLIM) for Second Stage Actuation in Hard Disc Drives,
Proc. IMST 2007 FIM XV, Eindhoven, The Netherlands
-
M. Bedenbecker, M. Hahn, C. Ruffert, H.H. Gatzen
(2007):
Linear Synchronous Micro Motor with Further Miniaturized Dimensions,
Proc. ASME 2007, Las Vegas, NV, USA, DETC2007-34677, ISBN 0-7918-3806-4
-
M. Bedenbecker, R. Bandorf, G. Bräuer, H. Lüthje, H.H. Gatzen
(2007):
Hart- und weichmagnetische Materialien für elektromagnetische Mikroaktoren,
Kolloquium Mikroproduktion, Forschungzentrum Karlsruhe GmbH, Karlsruhe, Deutschland, S. 159-164
-
S. Cvetkovic, C. Ruffert, H.H. Gatzen
(2007):
Assembly Concept of a Magnetic Levitation System for a Linear Micro Actuator,
Proc. ASME 2007, Las Vegas, NV, USA 2007, DETC2007-35266, ISBN 0-7918-3806-4
-
S. Cvetkovic, H.H. Gatzen
(2007):
Investigation on the Impact on Process Quality When Utilizing Different Pads during Chemical-Mechanical Polishing of MEMS,
Proc. ASPE 22nd Ann. Meet. 2007, Dallas, TX, USA, pp. 469-472
-
S. Cvetkovic, H.H. Gatzen
(2007):
Concept for Distinction Between the Circumferential and Sidewall Effects during Dicing of Single Crystal Silicon,
Proc. ASPE 22nd Ann. Meet. 2007, Dallas, TX, USA, pp. 386-389
-
S. Cvetkovic, H.H. Gatzen
(2007):
Challenges and Solutions for the Assembly of a Linear Micro Step Motor,
Proc. EUSPEN 7th Int. Conf. 2007, Bremen, Germany, Vol. 2, pp. 384-387
-
S. Cvetkovic, H.H. Gatzen
(2007):
Effect of Feed Rate and Grain Concentration on Ductile to Brittle Transition by Silicon Dicing,
Proc. EUSPEN 7th Int. Conf. 2007, Bremen, Germany, Vol. 2, pp. 380-383
-
S. Demmig, R. Gehrking, M. Hahn, K. Wiedemann, B. Ponick, H.H. Gatzen, A. Mertens
(2007):
Fortschritte bei der Auslegung und Regelung aktiver Mikrosysteme,
Kolloquium Mikroproduktion, Forschungszentrum Karlsruhe GmbH, Karlsruhe, Deutschland, S. 171-178
-
S. Hansen, L. Rissing, H.H. Gatzen
(2007):
Temperature Characteristics of a Magnetic Micro Strain Gauge,
EUROMAT 2007, Nürnberg, Germany, Physica Status Solidi (c), Symposium A23: Magnetic Thin Films. Wiley-VCH Verlag
-
D. Dinulovic, E. Flick, H. Gerdes, K. Feindt, M. Eccarius, H.H. Gatzen
(2006):
Concept for a Wafer Level Test System for Measuring Magnetic Film Properties,
210th Meet. of The Electrochemical Society 2006, Cancun, Mexico
-
D. Herrmann, D. Milletic, H.H. Gatzen
(2006):
Recognition of Professional Qualification for University Students in Engineering Sciences,
Book of Abstract 15th Int. Ass. for Manag. of Tech. IAMOT 2006, Beijing, P.R. China
-
H. Gerdes, D. Dinulovic, H.H. Gatzen
(2006):
Electromagnetic Dual-position Actuator for Measurement Applications,
Proc. Actuator 2006, 10th Int. Conf. on New Actuators, Bremen, Germany, pp. 824-827
-
H.H. Gatzen, C. Ruffert
(2006):
Microcoils in Thin-film Technology,
Proc. Inductica 2006, Berlin, Germany
-
H.H. Gatzen, C. Ruffert
(2006):
Advances in Magnetic Micro Thin-film Transducers,
210th Meet. of The Electrochemical Society, Cancun, Mexico, 2006
-
H.H. Gatzen, E. Flick
(2006):
Total Quality Management System for a Micro and Nano Technology Oriented University Institution,
Proc. 15th Int. Ass. for Manag. of Tech. IAMOT 2006, Beijing, P.R. China
-
H.H. Gatzen, M. Hahn, K. Ullakko
(2006):
Characterization of Magnetic Shape Memory (MSM) Material and its Application in a Hybrid Micro Actuator,
Proc. Actuator 2006, 10th Int. Conf. on New Actuators, Bremen, Germany, pp. 406-409
-
H.H. Gatzen, M. Hahn, M. Bedenbecker, B. Ponick, R. Gehrking, S. Demmig
(2006):
Advances in the Development of a Linear Hybrid Micro Actuator,
Proc. Actuator 2006, 10th Int. Conf. on New Actuators, Bremen, Germany, pp. 207-210
-
H.H. Gatzen, S. Cvetkovic
(2006):
Modeling CMP - Investigation of the Chemical Attack on the Mechanical Properties of Bulk Material,
Proc. EUSPEN 6th Int. Conf. 2006, Baden, Austria
-
K. Halalo, H.H. Gatzen
(2006):
Ceramic Micro Needle Array for Painless Drug Delivery and Biological Sensing,
Proc. EUSPEN 6th Int. Conf. 2006, Baden, Austria Sensing
-
K. Halalo, H.H. Gatzen
(2006):
Combining Mechanical Micromachining and Glass Bonding to Fabricate Robust Micro Structures,
Proc. EUSPEN 6th Int. Conf. 2006, Baden, Austria
-
K.-H. Wu, O. Traisigkhachol, H.H. Gatzen
(2006):
Development of a MIG-Head for Magnetic Storage of Information on Machine Components,
210th Meet. of The Electrochemical Society 2006, Cancun, Mexico
-
M. Bedenbecker, Z. Celinski, H.H. Gatzen
(2006):
Directional Permeability Dependence in Electroplated Permalloy Layers,
Proc. 210th Meet. of The Electrochemical Society, Cancun, Mexico, ecs transactions, Vol. 3, Issue 25, pp. 123-135
-
S. Hansen, L. Rissing, H.H. Gatzen
(2006):
A Concept for a Toolbox for Modular Magnetic Microsensors,
210th Meet. of The Electrochemical Society 2006, Cancun, Mexico
-
C. Neumeister, S. Walsh, H.H. Gatzen
(2005):
A Business Process Model for MEMS,
14th Int. Ass. for Manag. of Tech. IAMOT 2005, Vienna, Austria
-
D. Dinulovic, H.H. Gatzen
(2005):
Thin Film Inductive Micropositioning Sensor,
Proc. XIX Eurosensors Conf., Barcelona, Spain, Vol. II (W), pp. WPb25
-
H.H. Gatzen, C. Morsbach
(2005):
Kerf Sidewall Grove Formation during Ductile Dicing of Ceramic Materials,
Proc. ASPE 20th Ann. Meet. 2005, Norfolk, Virginia, USA, pp. 387-390
-
H.H. Gatzen, C. Neumeister
(2005):
GoPro, a business process model to support the development for MEMS,
COMS 2005, Baden-Baden, pp. 256-260
-
H.H. Gatzen, G. Günzel
(2005):
Investigations on the Influence of the Substrate’s Thickness on the Cut Quality During Dicing of thin Silicon Wafers,
Proc. euspen 5th Int. Conf. and 7th Ann. Gen. Meet. 2005, Montpellier, France, Vol. 2, pp. 589-590
-
H.H. Gatzen, M. Bedenbecker
(2005):
Magnetic Micro Systems – small, robust, versatile,
COMS 2005, Baden-Baden, pp. 444-448
-
H.H. Gatzen, M. Bedenbecker
(2005):
Magnetic Micro Systems – small, robust, versatile,
M2EMS Workshop Kreta
-
H.H. Gatzen, M. Bedenbecker, C. Ruffert
(2005):
Magnetische Mikrobauteile,
Proc. 8. Symposium Magnetoresistive Sensoren; Grundlagen - Herstellung - Anwendungen, 2005, Sensitec GmbH, Georg-Ohm-Str.1, D35633 Lahnau, pp. 28-36
-
M. Hahn, E. Pagounis, H.H. Gatzen
(2005):
Evaluation of a Micro Motor with Integrated MSM Material
,
Digest IEEE Intermag Conf. 2005, Nagoya, Japan, GF12, pp. 1683-1684
-
S. Cvetkovic, K.-H. Wu, H.H. Gatzen
(2005):
Modeling CMP - Investigation of the Mechanical Removal Mechanism,
Proc. ASPE 20th Ann. Meet. 2005, Norfolk, Virginia, USA, pp. 500-503
-
A. Ben Amor, C. Ruffert, H.H. Gatzen
(2004):
NiFe 45/55 and its Application in a Strain Gauge Sensor,
Proc. 8th Int. Symposium on Magnetic Materials, Processes and Devices, 206th Meet. of The Electrochemical Society 2004, Honolulu, Hawaii, USA, pp. 481-492
-
A. Ben Amor, T. Budde, H.H. Gatzen
(2004):
Magnetoelastic microtransformer with an improved sensor design,
Digests 9th Joint MMM-Intermag Conf. 2004, Anaheim, CA, USA, GP-15
-
C. Morsbach, N. Münter, R.J.M. Vullers, H.H. Gatzen
(2004):
Application of Far Field and Near Field Sliders in Optical Data Storage,
Digest 9th Joint MMM-Intermag Conf. 2004, Anaheim, CA, USA, GP-13
-
C. Neumeister, H.H. Gatzen
(2004):
Computer-Aided Variants Finding,
Proc. 13th Int. Ass. for Manag. Of Tech. IAMOT 2004, Washington, D.C. USA
-
D. Dinulovic, H.H. Gatzen
(2004):
Microfabricated Inductive Linear Micro Positioning Sensor,
Proc. 3rd IEEE Int. Conf. on sensors, IEEE Sensors 2004, Vienna, Austria, ISBN 0-7803-8692-2
-
D. Dinulovic, H.H. Gatzen
(2004):
Microfabricated Inductive Sensor for Position Measurements,
Proc. 8th Int. Symposium on Magnetic Materials, Processes and Devices, 206th Meet. of The Electrochemical Society 2004, Honolulu, Hawaii, USA, pp. 471-480
-
H.H. Gatzen
(2004):
Magnetic Materials in Thin Film Sensors and Actuators,
Proc. 8th Int. Symposium on Magnetic Materials, Processes and Devices, 206th Meet. of The Electrochemical Society 2004, Honolulu, Hawaii, USA, pp. 457-470
-
H.H. Gatzen, C. Kourouklis
(2004):
Mechanical Machining of Thin Polycrystalline Diamond Films,
ASPE 19th Ann. Meet. Orlando, Florida, USA, pp. 594-697
-
H.H. Gatzen, G. Günzel
(2004):
Improved Dicing Method for Thin Silicon Wafers,
Proc. 4th euspen Int. Conf. and 6th Ann. Gen. Meet. 2004, Glasgow, UK, pp. 143-144
-
H.H. Gatzen, G. Günzel
(2004):
Dicing of thin stacked wafer packages,
Proc. 7th Int. Symposium on Advances in Abrasive Technology 2004, Bursa, Turkey, pp. 443-446
-
H.H. Gatzen, H.-D. Stölting, B. Ponick
(2004):
Alternatives for Micro-machined Linear Actuators,
Proc. 9th Int. Conf. on New Actuators 2004, Bremen, Germany, pp. 665-668
-
M. Hahn, M. Bedenbecker, U. Brand, H.H. Gatzen
(2004):
Evaluation of a Linear Hybrid Micro Step Motor,
Proc. 8th Int. Symposium on Magnetic Materials, Processes and Devices, 206th Meet. of The Electrochemical Society 2004, Honolulu, Hawaii, USA, pp. 493-505
-
M.C. Wurz, D. Dinulovic, H.H. Gatzen
(2004):
Investigation of the permeability on electroplated and sputtered permalloy,
Proc. 8th Int. Symposium on Magnetic Materials, Processes and Devices, 206th Meet. of The Electrochemical Society 2004, Honolulu, Hawaii, USA, pp. 526-536
-
T. Budde, H.H. Gatzen
(2004):
Patterning Techniques for Thick SmCo Layers,
Proc. 18th International Workshop on High-Performance Magnets and Their Applications 2004, Annecy, France, pp. 805-816
-
T. Budde, M. Hahn, M. Föhse, J. Edler, H.-D. Stölting, H.H. Gatzen
(2004):
Design, Fabrication, and Characterization of a Hybrid Linear Micro Step Motor,
Proc. 9th Int. Conf. on New Actuators 2004, Bremen, Germany, pp. 665-668
-
W.-R. Zabel, S.B. Wiendl, U. Gunst, G. Poll, H.H. Gatzen, H.F. Arlinghaus
(2004):
The Influence of Chemical and Physical Boundary Layer Properties on the Tribological Performance of Rolling Element Bearings,
Proc. of 14th Int. Colloquium on Tribology 2004, Stuttgart/Ostfildern, pp. 1385-1393
-
B. Ma, C. Morsbach, H.H. Gatzen
(2003):
A Novel Flying Height Measurement Approach for Optical Sliders,
IEEE Proc. of AsiaSENSE 2003, Kuala Lumpur, Malaysia, pp. 29-32
-
C. Morsbach, N. Münter, S. Knappmann, H.H. Gatzen:
(2003):
Concepts for In-situ Flight Attitude Measurements of Optical Flying Heads,
Proc. Innovative Mass Storage Technology Workshop (IMST) 2003, Grenoble, France, Or 41
-
C. Neumeister, H.H. Gatzen
(2003):
Combined Matrix Selection to Support the Development of Products,
Proc. 12th Int. Ass. for Manag. of Tech. IAMOT 2003, Nancy, France
-
D. Dinulovic, T. Budde, H.H. Gatzen
(2003):
Design and fabrication of an inductive micro position sensor,
Statusseminare BMBF-Verbundvorhaben, Microtec, München, S. 295-300
-
H.-W. Hoffmeister, M. Hlavac, H.H. Gatzen, C. Morsbach
(2003):
Mikrostrukturierung durch Schleifen,
Mikromechanische Produktionstechnik, Abschlusskolloquium DFG Schwerpunktprogramm 1012. Shaker, Aachen, S. 39-54
-
H.H. Gatzen, C. Kourouklis
(2003):
Nano-Roughness Standards with a Very Low Roughness Value,
Proc. euspen 4th Int. Top. Conf. 2003, Aachen, Germany, Vol. 2, pp. 495-498
-
H.H. Gatzen, C. Morsbach
(2003):
Precision Profile Grinding of High Aspect Ratio Microstructures,
Proc. euspen Int. Top. Conf. 2003, Aachen, Germany, pp. 349-352
-
H.H. Gatzen, E. Obermeier, T. Kohlmeier, T. Budde, H.D. Ngo, B. Mukhopadhyay, M. Farr
(2003):
An Electromagnetically Actuated Bi-stable MEMS Optical Microswitch,
Proc. Transducers 03, Boston, MA, USA, pp. 1514-1517
-
H.H. Gatzen, G. Günzel
(2003):
Optimization of Chemical Mechanical Polishing of Thin Silicon Wafers,
Proc. euspen Int. Top. Conf. 2003, Aachen, Germany, Vol. 1, pp. 293-296
-
H.H. Gatzen, G.M Jones, C. Morsbach, G. Günzel, A. Karyazin
(2003):
Investigations Regarding the Interdependence of Spindle Load and Machine Performance During Slicing,
Proc. ASPE 18th Ann. Meet. 2003, Portland, Oregon, USA, pp. 435-438
-
L. Zhou, M. Beck, H.H. Gatzen, G. Vurens, F. E. Talke
(2003):
Tribology of textured pico-slider at a flying height of 5 nm,
Proc. TISD 2003, Monterey, CA, USA
-
L. Zhou, M. Beck, H.H. Gatzen, K. Altshuler, F. E. Talke:
(2003):
Slider Vibration Reduction Using Slider Surface Texture,
Proc. Joint Conf. on MIPE 2003, Japan
-
M. Balke, H. Lüthje, T. Budde, H.H. Gatzen, G. Bräuer
(2003):
Non-reactive and reactive ion etching processes for patterning magnetic MEMS components,
Proc. of the 2nd MICRO.tec Conf. 2003, Munich, pp. 51-52
-
M. Föhse, H.H. Gatzen:
(2003):
Erzeugung magnetischer NiFe-Dünnfilme durch galvanische Abscheidung mit Pulse-Plating,
Oberflächentage 2003, DGO-Veranstaltung, Tagungsband, Bremen
-
M. Föhse, J. Edler, H.D. Stölting, H.H. Gatzen
(2003):
A batch fabricated linear synchronous motor,
Proc. Int. Mech. Eng. Congr. and Expo IMECE 2003, Washington D.C., USA, pp. 1-8
-
R. Bandorf, M. Beck, H. Lüthje, J.-H. Sick, H.H. Gatzen
(2003):
Influence of the initial surface roughness on the wear behaviour of micro probes under rotating and oscillating flat micro contact,
Proc. 2nd MICRO.tec Conf. 2003, Munich, pp. 477-478
-
T. Budde, H.H. Gatzen
(2003):
Thick Sputter Deposited NiFe 45/55 Films for Flux Guides In Magnetic MEMS,
Proc. 16th Soft Magnetic Materials Conf. 2003, Düsseldorf, Germany, pp. 867-872
-
D. Dinulovic, H.H. Gatzen
(2002):
Entwicklung eines Wegmesssensors zur Überwachung eines Mikropositionierers,
Proc. 47th Internationales Wissenschaftliches Kolloquium 2002, Ilmenau, S. 673-674
-
H. Iswahjudi, H.H. Gatzen
(2002):
FEM Simulation for Design and Evaluation of an Eddy Current Microsensor,
Proc. 14th European Simulation Symposium and Exhibition 2002, Dresden, Germany, pp. 201-205
-
H.H. Gatzen
(2002):
Technologien für Mikromotoren,
Invited paper, Proc. MTT 2002, Erfurt, S. 37-41
-
H.H. Gatzen
(2002):
Advances in European Magnetic MEMS Technology,
Invited paper, Proc. 7th Int. Symposium on Magnetic Materials, Processes and Devices, 202nd Meet. of The Electrochemical Society 2002, Salt Lake City, UT, USA, pp. 90-108
-
H.H. Gatzen, C. Morsbach, A. Karyazin
(2002):
High Precision Machining of a Longitudinal Bearing for a Linear Microactuator,
Proc. 3rd Int. euspen Conf. 2002, Eindhoven, The Netherlands, pp. 325-328
-
H.H. Gatzen, C. Morsbach, A. Karyazin
(2002):
Mechanical Micromachining of High Aspect Ratio Microstructures,
Proc. ASPE 2002, 17th Ann. Meet. 2002, St. Louis, Missouri, USA, pp. 562-566
-
H.H. Gatzen, G. Günzel
(2002):
Dicing of Ultra-thin Silicon Wafers,
Proc. ASPE 2002, 17th Ann. Meet. 2002, St. Louis, Missouri, USA, pp. 557-561
-
H.H. Gatzen, G. M. Jones, A. Karyazin
(2002):
Chipping Minimization during Dicing and Slicing,
Proc. ASPE 2002, 17th Ann. Meet. 2002, St. Louis, Missouri, USA, pp. 551-556
-
L. Zhou, M. Beck, H.H. Gatzen, K. Kato, G. Vurens, F. E. Talke
(2002):
The effect of Slider Texture on the Tribology of Near Contact Recording Sliders,
Proc. Austrib 2002, Perth, Australia, pp. 229-126
-
M. Föhse, H.H. Gatzen
(2002):
Optimizing the Magnetic Properties of Electroplated Permalloy for Flux Guides in Micromotors,
Proc. 7th Int. Symposium on Magnetic Materials, Processes and Devices, 202nd Meet. of The Electrochemical Society 2002, Salt Lake City, UT, USA, pp. 125-136
-
M. Föhse, J. Edler, H.D. Stölting, H.H. Gatzen
(2002):
Design, Fabrication, and Characterization of a Miniature Linear Asynchronous Motor,
Proc. Actuator 2002, Bremen, Germany, pp. 176-179
-
M. Föhse, J. Edler, H.D. Stölting, H.H. Gatzen
(2002):
Investigations on the Pole Geometry Optimization of a Variable Reluctance Microactuator,
47. Internationales Wissenschaftliches Kolloqium, Ilmenau, Germany, pp. 215-216
-
T. Budde, H.H. Gatzen
(2002):
Magnetic Properties of Thick Sputter Deposited SmCo-Films for MEMS-Applications,
Digest Intermag Europe 2002, Amsterdam, The Netherlands, GD05
-
T. Kohlmeier, H.H. Gatzen
(2002):
Ni Electroplating in SU-8 Microforms for Fabricating Self Supporting Microstructures,
Proc. 7th Int. Symposium on Magnetic Materials, Processes and Devices, 202nd Meet. of The Electrochemical Society 2002, Salt Lake City, UT, USA, pp. 137-148
-
T. Kohlmeier, T. Budde, H.H. Gatzen
(2002):
Electromagnetic Bearing System for Integration in a Linear Microactuator,
Proc. Eurosensors XVI, The 16th European Conf. on Solid-State Transducers 2002, Prague, Czech Republic, pp. 1217-1220
-
U. Gunst, S.B. Wiendl, W.-R. Zabel, H.F. Arlinghaus, H.H. Gatzen, G. Poll
(2002):
Characterization of High-Speed Rolling Element Bearing, Greases and Additives with TOF-SIMS,
Proc. SIMS Europe, Münster, Germany, pp. 32
-
C.W. Chang, T. Budde, H.H. Gatzen, R.S. Muller
(2001):
A Magnetically Actuated Scanner for Intravascular Ultrasound Imaging,
Proc. ASME IMECE 2001, Int. Mechanical Engineering Congress and Exposition, New York, USA, Vol. 2, MEMS 23914
-
H.H. Gatzen, C. Kourouklis
(2001):
The Fabrication of Nano-Roughness Standards for the Calibration of Atomic Force Microscopes,
Proc. ASPE 16th Ann. Meet. 2001, Virginia, USA, pp. 493-496
-
H.H. Gatzen, C. Kourouklis, R. Krüger-Sehm
(2001):
Roughness Standards for the Calibration of SPM- from Design to Comparison Measurement,
Proc. 5th Seminar on Quantitative Microscopy, Nanoscale 2001, Bergisch Gladbach, pp. 7-13
-
H.H. Gatzen, C. Morsbach, G.M. Jones
(2001):
Investigations Regarding the Operating Range of Ultrathin Grinding Wheels on AlTiC,
Proc. 10th ICPE 2001, Yokohama, Japan
-
H.H. Gatzen, C. Morsbach, M. Tricard
(2001):
Dual Wheel Miniature Gang for Silicon Wafer Dicing,
Proc. euspen 2nd Intern. Conf. 2001, Turin, Italy, pp. 722-725
-
H.H. Gatzen, M. Beck
(2001):
DLC Coating Technology for Cutting Tools,
Proc. 2nd Int. Conf. 2001 THE Coatings, Hanover, C2-1-7
-
H.H. Gatzen, C. Morsbach, J. Zeadan
(2000):
Advances in Dicing Wafers for Micro Electro-Mechanical Systems (MEMS),
Proc. Micro.tec Conf. 2000, Hanover, VDE Publication, Vol. 2, pp. 621-625
-
H.H. Gatzen, H. Siekmann
(2000):
Investigations on the Tool Plate Preparation for Nanogrinding,
Proc. ASPE 15th Ann. Meet. Scottsdale, AZ, USA, pp. 90-93
-
H.H. Gatzen, H.-D. Stölting, S. Büttgenbach, H. Dimigen
(2000):
A Novel Variable Reluctance Micromotor for Linear Actuation,
Proc. Actuator 2000, Bremen, Germany, pp. 363-366
-
H.H. Gatzen, J. Zeadan
(2000):
Investigations on the Coolant Supply in Precision Dicing,
Proc. ASPE 15th Ann. Meet. 2000, Scottsdale, AZ, USA, pp. 90-93
-
W. Bach, K. Möhwald, H.H. Gatzen, C. Morsbach
(2000):
Metall-Kapillardruckgießen: ein neues Urformverfahren für die Mikromechanik (Metal Capillary Casting, a New Micromechanical Technology),
7. Werkstoffwissenschaftliches Kolloquium, Innovative Werkstofftechnologie 1999, Aachen, Werkstoffwissenschaftliche Schriftenreihe, Band 41, S. 67-73
-
C. Morsbach, H.H. Gatzen
(1999):
Investigations on the Wear Profile of Dicing Wheels,
Proc. ASPE 14th Ann. Meet. 1999, Monterey, CA, USA, pp. 67-70
-
H.H. Gatzen, H. Siekmann
(1999):
Plate Topography Influence on the Nanogrinding Process.,
Proc. ASPE 14th Ann. Meet. Monterey, CA, USA, pp. 83-86
-
H.H. Gatzen, J. Zeadan, G. Jones
(1999):
Kerf Sidewall Phenomena in Slicing Processes of Thin Film Heads,
Proc. euspen 1st Int. Conf. 1999, Bremen, pp. 548-461
-
H.H. Gatzen, L. Rissing
(1999):
Composition Dependent Magnetostrictive Properties of NiFe Films,
Proc. ASME Ann. Meet. 1999, Nashville, Tennessie, USA, pp. 151-155
-
H.H. Gatzen, L. Rissing, T. Woywod
(1999):
Magnetoelastic Microtransformer with an Improved Core Design,
Digest IEEE Intermag Conf. 1999, Kyongju, South Korea, GF-02, ISBN:0-7803-5555-5
-
H.H. Gatzen, M. Beck, J. Zeadan
(1999):
Technological Challenges in Ultraprecision Grinding of Flexural Microsensor,
Proc. euspen 1st Int. Conf. 1999, Bremen, Germany, Vol. 1, pp. 538-541
-
K. Möhwald, C. Morsbach, F.-W. Bach, H.H. Gatzen
(1999):
Investigations on Capillary Action Microcasting of Metals,
Proc. EUSPEN 1st Int. Conf. 1999, Bremen, Germany, Vol. 1, pp. 490-493
-
H.H. Gatzen, H.K. Tönshoff
(1998):
Risk Management and Product Integrity – A Simple Approach to Concurrent Engineering,
Proc. TMCE 1998, Manchester, UK
-
H.H. Gatzen, L. Ruhbach
(1998):
Mechanical Microprofiling Mechanisms of Advanced Ceramics,
Proc. 13th Ann. Meet. 1998, St Louis, MO, USA, pp. 69-75
-
T. Hellmold, L.P. Ruhbach, J. Zeadan, H.H. Gatzen
(1998):
Ductile Mode Cutting of Silicon Microparts,
Proc. ASPE Spring Topical Meet. 1998, Monterey, CA, USA
-
H.H. Gatzen
(1997):
Precision Engineering Requirements in Magnetic Memory Disc File Systems,
Invited paper, Proc. 9th Precision Engineering Seminar 1997, Braunschweig
-
H.H. Gatzen
(1997):
Challenges in thin film head machining,
Data Storage, Vol. 3, pp. 85-90
-
H.H. Gatzen, H.K. Tönshoff
(1997):
Risk Management and Product Integrity – A Simple Approach to
Concurrent Engineering,
Proc. TMCE 1998, Manchester, UK, 1997
-
H.H. Gatzen, J.C. Mätzig, H. Siekmann
(1997):
Applying Scanning Probe Microscopy to Ultraprecision-Machining,
Proc. european Workshop on Microtechnology and Scanning Probe Microscopy 1997, Mainz
-
H.H. Gatzen, J.C. Mätzig, H. Siekmann
(1997):
Rauheitsmessungen im Subnanometerbereich: Vergleich optischer und tastender Messverfahren (Roughness Measurement in the Subnanometer Range – a Comparison between Optical and Tactile Methods),
Proc. Workshop 1997: New Developments and Applications in Scanning Probe Microscopy, Dresden, Germany
-
H.H. Gatzen, J.C. Mätzig, L.P. Ruhbach
(1997):
White Light Interferometry and Atomic Force Microscopy Grinding Tool Topography Measurements - A Comparison,
Proc. 4th Int. Conf. on Ultraprecision in Manufacturing Engineering 1997, Braunschweig, Germany
-
H.H. Gatzen, J.C. Mätzig, L.P. Ruhbach
(1997):
Grinding Tool Topography Analysis by White Light Interferometry and Atomic Force Microscopy,
Proc. 9th Precision Engineering 1997, Braunschweig
-
H.H. Gatzen, J.C. Mätzig, L.P. Ruhbach
(1997):
Ultraprecision Grinding of High Aspect Ratio Microparts,
Proc. ASPE 12th Ann. Meet. 1997, Norfolk, UK, VA, pp. 454-457
-
H.H. Gatzen, M.S. Schwabe
(1997):
Technological Investigations for the Manufacture of Giant Magnetoresistive (GMR) Structures,
Proc. SICAN Fall Conf. 1997, Hanover, Germany
-
H.H. Gatzen, S.A. Zielke
(1997):
Finite Element Analysis of Dual Magnetic Field Sensors,
SICAN Fall Conf. 1997, Hanover
-
H.H. Gatzen, J.C. Mätzig
(1996):
Minimierung der Rauheit beim Nanoschleifen isostatisch heißgepreßter Keramikwerkstoffe (Roughness Minimization during Nanogrinding of Hot Isostatic Pressed Ceramics),
Proc. 8th Precision Engineering, Braunschweig, pp. 22.1-22.21
-
H.H. Gatzen
(1995):
Microtechnology and its Application in Data Storage - An Overview,
Proc. SICAN and CAD/CAT Lower Saxony Conf. 1995, Germany
-
H.H. Gatzen
(1995):
Time to Market - Schlüssel zum Erfolg bei Hochtechnologieprodukten (Time to Market - The Key to Success with High Technology Products),
Proc. SICAN and CAD/CAT Lower Saxony Conf. 1995, Germany
-
H.H. Gatzen
(1995):
Magnetic Micromechanics Activities in Germany,
Invited paper, Proc. 4th Int. Symposium on Materials, Processes and Devices 1995, Chicago, Illinois, USA
-
H.H. Gatzen, G.F. Hughes
(1987):
Flight Attitude and Take-off/Landing Behavior of a Miniature Winchester Head for Rotary Actuators,
Proc. ASLE Tribology Conf. 1987, San Antonio, Texas, USA, pp. 133-137
-
H.H. Gatzen, L.W. Fay
(1982):
Positional Accuracy and Acoustic Noise Problems in High Track Density Floppy Disk Drives with a Step Motor Driven Band Actuator,
Proc. 11th Ann. Symposium on Incremental Motion Control Systems and Devices 1982, Chicago, Illinois, USA, pp. 197-207
-
H.H. Gatzen
(1977):
Bütykös tárcsa felületeinek egyenetlensége és érdessége által létrehozott zavaró gyorsulások (Disturbing Accelerations caused by Waviness and Roughness of the Cam Surface),
Finommechanika Microtechnika 12
-
H.H. Gatzen, J. Heinzl
(1977):
Dynamik schnellaufender Kurvengetriebe (Dynamics of High Speed Cam Follower Systems),
Proc. Second Symposium on Linkages and Computer Aided Design Methods, Vol. 3, No. 1, paper 24, Bucharest, Rumänien and I-Magazine No. 281, Düsseldorf, pp. 163-169
-
H.H. Gatzen
(1976):
Die quantitative Abschätzung der Störbeschleunigungen bei Kurvengetrieben (A Quantitative Analysis of Disturbing Accelerations in Cam Follower Systems),
Proc. Constronic '76, Budapest, Ungarn, pp. 327-336
