Publications

Journals

First 1

Investigation of Laser Ablation and Brush Pre-Treatments for Al.Cu Cold Roll Bonding in Oxygen-Free Conditions. / Barienti, Khemais; Janthur, Finn Lennard; Raumel, Selina et al.
In: Advanced engineering materials, 23.02.2026.

Research output: Contribution to journal › Article › Research › peer review

Assessing Altered Coating Adhesion on Plasma-Deoxidized Surfaces Under Oxygen-Free Conditions. / Raumel, Selina; Kuhr, Lara; Barienti, Khemais et al.
In: Advanced engineering materials, 2026.

Research output: Contribution to journal › Article › Research › peer review

Balanced-armature-based, electromagnetic actuator for round window stimulation of the inner ear with static pre-load. / Prediger, Maren S; Müller, Eileen; Glukhovskoy, Anatoly et al.
In: Biomedical microdevices, Vol. 28, No. 1, 1, 29.12.2025.

Research output: Contribution to journal › Article › Research › peer review

Convolutional autoencoder based condition monitoring system for unique complex technical systems. / Tahtali, Emre; Adamscheck, Marco; Overmeyer, Ludger et al.
In: Scientific reports, Vol. 15, No. 1, 39582, 12.11.2025.

Research output: Contribution to journal › Article › Research › peer review

Developments for quantum inertial navigation systems employing Bose–Einstein condensates. / Gersemann, M.; Rajagopalan, A.; Abidi, M. et al.
In: Applied physics reviews, Vol. 12, No. 3, 031306, 09.2025.

Research output: Contribution to journal › Article › Research › peer review

Location- and time-resolved strain measurement in thrust roller bearings using thin-film sensors. / Konopka, Dennis; Steppeler, Tobias; Ottermann, Rico et al.
In: Forschung im Ingenieurwesen/Engineering Research, Vol. 89, No. 1, 83, 01.08.2025.

Research output: Contribution to journal › Article › Research › peer review

Development of a Transformer-Based Inductive Sensor for Monitoring Deep Drawing Processes. / Kamrani, Sara; Ottermann, Rico; Kalkert, Peter et al.
In: Sensing and Imaging, Vol. 26, No. 1, 44, 09.04.2025.

Research output: Contribution to journal › Article › Research › peer review

Directly Deposited Thin-Film Strain Gauges for Force Measurement at Guide Carriages. / Ottermann, Rico; Kowalke, Dennis; Denkena, Berend et al.
In: IEEE sensors journal, Vol. 24, No. 24, 15.12.2024, p. 40471-40484.

Research output: Contribution to journal › Article › Research › peer review

Propriozeption in der Soft Robotics. / Müller, E.; Cao, B.; Peters, J. et al.
In: WT Werkstattstechnik, Vol. 114, No. 11-12, 11.12.2024, p. 735-740.

Research output: Contribution to journal › Article › Research › peer review

Laser Direct Structuring of Millable BN‐AlN Ceramic for Three‐Dimensional (3D) Components. / Raumel, Selina; Xiao, Xiao; Bengsch, Sebastian et al.
In: Advanced engineering materials, Vol. 26, No. 23, 2401271, 04.12.2024.

Research output: Contribution to journal › Article › Research › peer review

Waveguides Written by Femtosecond Laser in CVD Diamonds. / Perevoznik, D.; Locmelis, J.; Zuber, D. et al.
In: EPJ Web of Conferences, Vol. 307, 02034, 18.10.2024.

Research output: Contribution to journal › Conference article › Research › peer review

A Review on Sensor-Integrating Machine Elements. / Kirchner, Eckhard; Wallmersperger, Thomas; Gwosch, Thomas et al.
In: Advanced Sensor Research, Vol. 3, No. 4, 2300113, 11.04.2024.

Research output: Contribution to journal › Article › Research › peer review

Integrated multimode optical waveguides in glass using laser induced deep etching. / Reitz, Birger; Evertz, Andreas; Basten, Robin et al.
In: Applied optics, Vol. 63, No. 4, 01.02.2024, p. 895-903.

Research output: Contribution to journal › Article › Research › peer review

Detailed characterisation of batch-manufactured flexible micro-grinding tools for electrochemical assisted grinding of copper surfaces. / Steinhoff, Lukas; Ottermann, Rico; Dencker, Folke et al.
In: The International Journal of Advanced Manufacturing Technology, Vol. 128, No. 5-6, 09.2023, p. 2301-2310.

Research output: Contribution to journal › Article › Research › peer review

Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditions. / Raumel, Selina; Barienti, Khemais; Luu, Hoang Thien et al.
In: Friction, Vol. 11, No. 8, 08.2023, p. 1505–1521.

Research output: Contribution to journal › Article › Research › peer review

Enhanced findability and reusability of engineering data by contextual metadata. / Altun, Osman; Oladazimi, Pooya; Wawer, Max Leo et al.
In: Proceedings of the Design Society, Vol. 3, 19.06.2023, p. 1635-1644.

Research output: Contribution to journal › Conference article › Research › peer review

Soliton compression and supercontinuum spectra in nonlinear diamond photonics. / Melchert, O.; Kinnewig, S.; Dencker, F. et al.
In: Diamond and Related Materials, Vol. 136, 109939, 06.2023.

Research output: Contribution to journal › Article › Research › peer review

Application of batch manufactured flexible micro-grinding tools on copper and oxidized copper surfaces. / Steinhoff, Lukas; Dencker, Folke; Wurz, Marc Christopher.
In: Tribologie und Schmierungstechnik, Vol. 70, No. 1, 27.03.2023, p. 5-10.

Research output: Contribution to journal › Article › Research › peer review

Detection of joining mechanisms at different locations of the wire/substrate interface during ultrasonic wire bonding via a PZT-based sensor array. / Long, Yangyang; Arndt, Matthias; Sun, Chen et al.
In: Journal of Materials Processing Technology, Vol. 312, 117826, 03.2023.

Research output: Contribution to journal › Article › Research › peer review

Process Development for Batch Production of Micro-Milling Tools Made of Silicon Carbide by Means of the Dry Etching Process. / Wittek, Christian-G R.; Steinhoff, Lukas; Raumel, Selina et al.
In: Micromachines, Vol. 14, No. 3, 580, 28.02.2023.

Research output: Contribution to journal › Article › Research › peer review

Oxygen-free resistance heating with nitrogen and silane as an energy-efficient heating process for hot stamping. / Behrens, Bernd-Arno; Hübner, Sven; Holländer, Ulrich et al.
In: IOP Conference Series: Materials Science and Engineering, Vol. 1284, 012007, 2023.

Research output: Contribution to journal › Conference article › Research › peer review

Young’s Modulus and Residual Stresses of Oxide-Free Wire Arc Sprayed Copper Coatings. / Rodriguez Diaz, Manuel; Raumel, Selina; Wurz, Marc Christopher et al.
In: COATINGS, Vol. 12, No. 10, 1482, 06.10.2022.

Research output: Contribution to journal › Article › Research › peer review

Degeneration Effects of Thin-Film Sensors after Critical Load Conditions of Machine Components. / Ottermann, Rico; Steppeler, Tobias; Dencker, Folke et al.
In: Machines, Vol. 10, No. 10, 870, 27.09.2022.

Research output: Contribution to journal › Article › Research › peer review

Impact of surface texture on ultrasonic wire bonding process. / Long, Yangyang; Arndt, Matthias; Dencker, Folke et al.
In: Journal of Materials Research and Technology, Vol. 20, 09.2022, p. 1828-1838.

Research output: Contribution to journal › Article › Research › peer review

Nonevaporable getter-MEMS for generating UHV conditions in small volumina. / Diekmann, Leonard Frank; Kassner, Alexander; Dencker, Folke et al.
In: Journal of Vacuum Science and Technology B, Vol. 40, No. 5, 054202, 09.2022.

Research output: Contribution to journal › Article › Research › peer review

Nanoindentation in alumina coated Al: Molecular dynamics simulations and experiments. / Luu, Hoang Thien; Raumel, Selina; Dencker, Folke et al.
In: Surface and Coatings Technology, Vol. 437, 128342, 15.05.2022.

Research output: Contribution to journal › Article › Research › peer review

Characterization of Microtransformers with Magnetic Ni-Fe-W alloy Cores Plated at Two Different Substrate Temperatures. / Mundotiya, Brij Mohan; Dinulovic, Dragan; Rissing, Lutz et al.
In: Sensors and Actuators A: Physical, Vol. 338, 113454, 01.05.2022.

Research output: Contribution to journal › Article › Research › peer review

Residual Stresses from Incremental Hole Drilling Using Directly Deposited Thin Film Strain Gauges. / Heikebrügge, S.; Ottermann, R.; Breidenstein, B. et al.
In: Experimental mechanics, Vol. 62, No. 4, 04.2022, p. 701-713.

Research output: Contribution to journal › Article › Research › peer review

Effect of PEG functionalization on the saturation magnetization of magnetic nanoporous core-shell nanoparticles. / Herrmann, T.; Schierz, A. K.; Prediger, M. et al.
In: International Journal on Magnetic Particle Imaging, Vol. 8, No. 1, 2203009, 21.03.2022.

Research output: Contribution to journal › Article › Research › peer review

Experimental Investigation of the Rapid Fabrication of Micronand Submicron Structures on Polymers Utilizing Ultrasonic Assisted Embossing. / Zhu, Yongyong; Bengsch, Sebastian; Zheng, Lei et al.
In: Polymers, Vol. 13, No. 15, 2417, 01.08.2021.

Research output: Contribution to journal › Article › Research › peer review

Towards a Highly Sensitive Piezoelectric Nano-Mass Detection: A Model-Based Concept Study. / Twiefel, Jens; Glukhovskoy, Anatoly; de Wall, Sascha et al.
In: Sensors, Vol. 21, No. 7, 2533, 04.04.2021.

Research output: Contribution to journal › Article › Research › peer review

Einfluss von Silan-dotierten Umgebungsatmosphären auf tribologischen Eigenschaften von Titan. / Raumel, Selina; Barienti, Khemais; Dencker, Folke et al.
In: Tribologie und Schmierungstechnik, Vol. 68, No. 1, 22.03.2021, p. 5-13.

Research output: Contribution to journal › Article › Research › peer review

Transfer Printing of Conductive Thin-Films on PDMS with Soluble Substrates for Flexible Biosensors. / Hadeler, Steffen; Bengsch, Sebastian; Prediger, Maren et al.
In: Engineering Proceedings, Vol. 2, No. 1, 14.11.2020, p. 8181.

Research output: Contribution to journal › Conference article › Research › peer review

Development, characterisation and high-temperature suitability of thin-film strain gauges directly deposited with a new sputter coating system. / Klaas, Daniel; Ottermann, Rico; Dencker, Folke et al.
In: Sensors (Switzerland), Vol. 20, No. 11, 3294, 10.06.2020, p. 1-15.

Research output: Contribution to journal › Article › Research › peer review

Flexibel und druckempfindlich: Sensoren für die Insertionsüberwachung in der Cochlea. / Prediger, Maren; Wurz, Marc Christopher.
In: Unimagazin: Forschungsmagazin der Leibniz Universität Hannover, Vol. 2020, No. 1/2, 2020, p. 46-48.

Research output: Contribution to journal › Article › Transfer

Integrated atomic quantum technologies in demanding environments: development and qualification of miniaturized optical setups and integration technologies for UHV and space operation. / Christ, Marc; Kassner, Alexander; Smol, Robert et al.
In: CEAS Space Journal, Vol. 11, No. 4, 01.12.2019, p. 561-566.

Research output: Contribution to journal › Article › Research › peer review

„Hai-Tech“ spanend fertigen: Mikroschleifen – funktionalisierte Oberflächen – selbstschärfende Werkzeuge. / Wurz, Marc Christopher; Denkena, Berend; Asadi, Esmail et al.
In: WB Werkstatt und Betrieb, Vol. 2019, No. 6, 23.07.2019, p. 48-51.

Research output: Contribution to journal › Article › Research

Substrate modification influence on properties of nanocomposite based on TiO₂ and gold nanoparticles. / Mishin, M. V.; Vorobyev, A. A.; Kondrateva, A. S. et al.
In: Journal of Physics: Conference Series, Vol. 1236, No. 1, 012025, 06.2019.

Research output: Contribution to journal › Conference article › Research › peer review

Microfabricated Magnetics on Silicon for Point of Load High-Frequency DC-DC Converter Applications. / Dinulovic, Dragan; Shousha, Mahmoud; Haug, Martin et al.
In: IEEE Transactions on Industry Applications, Vol. 55, No. 5, 8732443, 2019, p. 5068-5077.

Research output: Contribution to journal › Article › Research › peer review

Revealing of ultrasonic wire bonding mechanisms via metal-glass bonding. / Long, Yangyang; Dencker, Folke; Isaak, Andreas et al.
In: Materials Science and Engineering B: Solid-State Materials for Advanced Technology, Vol. 236-237, 10.2018, p. 189-196.

Research output: Contribution to journal › Article › Research › peer review

Magnetic Properties of Thermal Sprayed Tungsten Carbide–Cobalt Coatings. / Angrisani, Gian Luigi; Taptimthong, Piriya; Thürer, Susanne Elisabeth et al.
In: Advanced engineering materials, Vol. 20, No. 9, 1800102, 24.09.2018.

Research output: Contribution to journal › Article › Research › peer review

Design and characterization of the lateral actuator of a bimodal tactile display with two excitation directions. / Schmelt, Andreas S.; Hofmann, Viktor; Fischer, Eike C. et al.
In: Displays, Vol. 54, 09.2018, p. 34-46.

Research output: Contribution to journal › Article › Research › peer review

Self-cleaning mechanisms in ultrasonic bonding of Al wire. / Long, Yangyang; Dencker, Folke; Isaak, Andreas et al.
In: Journal of Materials Processing Technology, Vol. 258, 08.2018, p. 58-66.

Research output: Contribution to journal › Article › Research › peer review

The mechanism of charge carrier generation at the TiO₂—n-Si heterojunction activated by gold nanoparticles. / Mishin, Maxim V.; Vorobyev, Alexander A.; Kondrateva, Anastasia S. et al.
In: Semiconductor Science and Technology, Vol. 33, No. 7, 075014, 11.06.2018.

Research output: Contribution to journal › Article › Research › peer review

Grinding of riblets with "beaver tooth" multi-layer tools. / Hockauf, Rolf; Asadi, Esmail; Denkena, Berend et al.
In: Procedia CIRP, Vol. 71, 2018, p. 155-159.

Research output: Contribution to journal › Conference article › Research › peer review

Fabrication and characterization of a Ni-Fe-W core microtransformer for high-Frequency power applications. / Mundotiya, Brij Mohan; Dinulovic, Dragan; Rissing, Lutz et al.
In: Sensors and Actuators, A: Physical, Vol. 267, 01.11.2017, p. 42-47.

Research output: Contribution to journal › Article › Research › peer review

Comparative Study of Microfabricated Inductors/Transformers for High-Frequency Power Applications. / Dinulovic, Dragan; Shousha, Mahmoud; Haug, Martin et al.
In: IEEE transactions on magnetics, Vol. 53, No. 11, 8000366, 11.2017.

Research output: Contribution to journal › Article › Research › peer review

Feasibility of Round Window Stimulation by a Novel Electromagnetic Microactuator. / Van Drunen, Wouter Johannes; Mueller, Mathias; Glukhovskoy, Anatoly et al.
In: BioMed Research International, Vol. 2017, 6369247, 29.10.2017.

Research output: Contribution to journal › Article › Research › peer review

Investigation of intracochlear dual actuator stimulation in a scaled test rig. / Van Drunen, Wouter J.; Lachheb, Sarra Kacha; Glukhovskoy, Anatoly et al.
In: Current Directions in Biomedical Engineering, Vol. 3, No. 2, 09.2017, p. 119-122.

Research output: Contribution to journal › Article › Research › peer review

Chip bonding of low-melting eutectic alloys by transmitted laser radiation. / Hoff, Christian; Venkatesh, Arjun; Schneider, Friedrich et al.
In: Advanced Optical Technologies, Vol. 6, No. 3-4, 12.04.2017, p. 311-317.

Research output: Contribution to journal › Article › Research › peer review

Technical inheritance: Information basis for the identification and development of product generations. / Mozgova, Iryna; Barton, Sebastian; Demminger, Christian et al.
In: Proceedings of the International Conference on Engineering Design, ICED, Vol. 6, No. DS87-6, 2017, p. 91-100.

Research output: Contribution to journal › Conference article › Research › peer review

Longitudinal conductivity of LaF₃/SrF₂ multilayer heterostructures. / Vergentev, Tikhon; Banshchikov, Alexander; Filimonov, Alexey et al.
In: Science and Technology of Advanced Materials, Vol. 17, No. 1, 25.11.2016, p. 799-806.

Research output: Contribution to journal › Article › Research › peer review

Development of a Humidity Sensor Element Based on Sputter-deposited thin ZnO-Layers. / Klaas, Daniel; Rein, M.; Wurz, Marc et al.
In: Procedia Technology, Vol. 26, 01.10.2016, p. 27-34.

Research output: Contribution to journal › Conference article › Research

Flexible Magnetic Reading/Writing System: Heat-assisted Magnetic Recording. / Taptimthong, Piriya; Düsing, Jan Friedrich; Rissing, Lutz et al.
In: Procedia Technology, Vol. 26, 01.10.2016, p. 72-78.

Research output: Contribution to journal › Conference article › Research

Stress Reduction in Sputtered Thin NiFe 81/19 Layers for Magnetic Field Sensors. / Jogschies, Lisa; Rittinger, Johannes; Klaas, Daniel et al.
In: Procedia Technology, Vol. 26, 01.10.2016, p. 162-168.

Research output: Contribution to journal › Conference article › Research

Intracochlear Stimulation of the Basilar Membrane. / van Drunen, Wouter J; Hofmann, Viktor; Twiefel, Jens et al.
In: Biomedizinische Technik, Vol. 61, No. s1, 28.09.2016, p. 179-199.

Research output: Contribution to journal › Article › Research › peer review

Direct hot embossing of microelements by means of photostructurable polyimide. / Akin, Meriem; Rezem, Maher; Rahlves, Maik et al.
In: Journal of Micro/ Nanolithography, MEMS, and MOEMS, Vol. 15, No. 3, 034506, 23.08.2016.

Research output: Contribution to journal › Article › Research › peer review

Effect of Substrate Temperature on Magnetic Properties of Electroplated 82Ni-15Fe-3W Alloy Films. / Mundotiya, Brij Mohan; Rissing, Lutz; Wurz, Marc Christopher.
In: IEEE Transactions on Magnetics, Vol. 52, No. 8, 7448397, 08.2016.

Research output: Contribution to journal › Article › Research › peer review

Magnetic microstructure analysis of sputter deposited permalloy thin films on a spin-on polyimide substrate. / Rittinger, Johannes; Taptimthong, Piriya; Jogschies, Lisa et al.
In: Microsystem Technologies, Vol. 22, No. 7, 07.2016, p. 1627-1632.

Research output: Contribution to journal › Article › Research › peer review

Improved Microtransformer Design Utilizing Fe-Co Magnetic Core. / Dinulovic, Dragan; Gerfer, Alexander; Haug, Martin et al.
In: Physics Procedia, Vol. 75, 29.12.2015, p. 1252-1258.

Research output: Contribution to journal › Conference article › Research › peer review

Recent developments of magnetoresistive sensors for industrial applications. / Jogschies, Lisa; Klaas, Daniel; Kruppe, Rahel et al.
In: Sensors (Switzerland), Vol. 15, No. 11, 12.11.2015, p. 28665-28689.

Research output: Contribution to journal › Article › Research › peer review

Custom Lithium Niobate Transducer Arrays for Detecting Material Distribution of Hybrid Workpieces. / Saalbach, Kai-Alexander; Wurz, Marc Christopher; Twiefel, Jens et al.
In: Energy Harvesting and Systems - Materials, Mechanisms, Circuits and Storage (Print), Vol. 2, No. 3-4, 21.03.2015, p. 137-142.

Research output: Contribution to journal › Article › Research › peer review

Flexible Magnetic Writing / Reading System: Polyimide Film as Flexible Substrate. / Taptimthong, Piriya; Rittinger, Johannes; Wurz, Marc Christopher et al.
In: Procedia Technology, Vol. 15, 01.10.2014, p. 230-237.

Research output: Contribution to journal › Article › Research › peer review

Microtransformer with closed Fe-Co magnetic core for high frequency power applications. / Dinulovic, Dragan; Kaiser, Matthias; Gerfer, Alexander et al.
In: Journal of Applied Physics, Vol. 115, No. 17, 17A317, 07.05.2014.

Research output: Contribution to journal › Article › Research › peer review

Development, micro fabrication, and test of flexible magnetic write head for gentelligent applications. / Belski, Alexander; Wurz, Marc Christopher; Rittinger, Johannes et al.
In: Microelectronic Engineering, Vol. 110, 26.02.2013, p. 315-319.

Research output: Contribution to journal › Article › Research › peer review

Development, fabrication, and test of a modular eddy current micro sensor on a flexible polymer foil. / Griesbach, Tim; Wurz, Marc Christopher; Rissing, Lutz.
In: Production Engineering, Vol. 7, No. 1, 01.2013, p. 3-8.

Research output: Contribution to journal › Article › Research › peer review

Designs and characterizations of soft magnetic flux guides in a 3-D magnetic field sensor. / Chen, Jue; Wurz, Marc C.; Belski, Alexander et al.
In: IEEE transactions on magnetics, Vol. 48, No. 4, 6172423, 04.2012, p. 1481-1484.

Research output: Contribution to journal › Article › Research › peer review

Design, fabrication, and testing of a modular magnetic field microsensor on a flexible polymer foil. / Griesbach, Tim; Wurz, Marc Christopher; Rissing, Lutz.
In: IEEE transactions on magnetics, Vol. 48, No. 11, 6332572, 2012, p. 3843-3846.

Research output: Contribution to journal › Article › Research › peer review

Process principle for the production of sintered dynamic component-inherent data storage. / Belski, Alexander; Gastan, Edin; Vahed, Najmeh et al.
In: Production Engineering, Vol. 5, No. 3, 05.12.2011, p. 233-240.

Research output: Contribution to journal › Article › Research › peer review

Einsatz von kupfer und kupferlegierungen in der mikrosystemtechnik. / Wurz, M. C.; Rissing, L.
In: Metall, Vol. 65, No. 11, 11.2011, p. 504-506.

Research output: Contribution to journal › Article › Research › peer review

Modular eddy current micro sensor. / Griesbach, Tim; Wurz, Marc Christopher; Rissing, Lutz.
In: IEEE transactions on magnetics, Vol. 47, No. 10, 6027638, 10.2011, p. 3760-3763.

Research output: Contribution to journal › Article › Research › peer review

Design and fabrication of a modular eddy current micro sensor. / Griesbach, T.; Wurz, M. C.; Rissing, L.
In: Progress in Electromagnetics Research Symposium, 2011, p. 752-755.

Research output: Contribution to journal › Conference article › Research › peer review

Applying SU-8™ to the fabrication of micro electro discharge machining electrodes. / Traisigkhachol, Ornwasa; Schmid, Hermann; Wurz, Marc et al.
In: Microsystem technologies, Vol. 16, No. 8-9, 08.2010, p. 1445-1450.

Research output: Contribution to journal › Article › Research › peer review

Using magneto-optical measurements for the evaluation of a hybrid magnetic shape memory (MSM)-based microactuator. / Spasova, B.; Wurz, M. C.; Ruffert, C. et al.
In: IEEE transactions on magnetics, Vol. 46, No. 6, 5467400, 06.2010, p. 2256-2259.

Research output: Contribution to journal › Article › Research › peer review

Application of MSM bulk material in a hybrid microactuator. / Spasova, B.; Ruffert, C.; Wurz, M. C. et al.
In: Physica Status Solidi (A) Applications and Materials Science, Vol. 205, No. 10, 10.2008, p. 2307-2312.

Research output: Contribution to journal › Article › Research › peer review

Manufacturing technology for the fabrication a discrete actuator using a magnetic shape memory alloy. / Spasova, B.; Wurz, M. C.; Gatzen, H. H.
In: European Physical Journal: Special Topics, Vol. 158, No. 1, 05.2008, p. 243-247.

Research output: Contribution to journal › Article › Research › peer review

Fabrication of a Micro Coil for Magnetooptical Data Storage. / Wurz, Marc C.; Ruffert, Christine; Gatzen, Hans H.
In: IEEE transactions on magnetics, Vol. 42, No. 10, 10.2006, p. 2468-2470.

Research output: Contribution to journal › Article › Research › peer review

Conference Papers, Conference Proceedings, Collections, Reports and Books

First 1 2 Last

Technology Demonstrator for a Glass-Based Quantum System. / Pöpsel, Frederik; Kassner, Alexander; Heine, Hendrik et al.
2025. Paper presented at 2025 IEEE 34th Conference on Electrical Performance of Electronic Packaging and Systems (EPEPS), Milpitas, California, United States.

Research output: Contribution to conference › Paper › Research › peer review

Diamond Coating of Diced Si Field Emitters for Enhanced Field Emission Performance. / Buchta, Aleksandra Monika; Thomas, Evan Lloyd Hunter; Kassner, Alexander et al.
2025 38th International Vacuum Nanoelectronics Conference, IVNC 2025. 2025.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Lithography-Free Anisotropic Magnetoresistance Sensor-Based Rotational Speed Measurement System on PEEK with Integrated Electronics. / Bierwirth, Tim Nils; Bengsch, Sebastian; Fischer, Eike Christian et al.
Proceedings - IEEE 75th Electronic Components and Technology Conference, ECTC 2025. Institute of Electrical and Electronics Engineers Inc., 2025. p. 1981-1985 (Proceedings - Electronic Components and Technology Conference).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Miniaturized 3D Glass Package for High-Efficiency and High-Power Density 48V DC-DC Converters. / Koch, Jannik; Winkler, Joseph; Wicht, Bernhard et al.
2025 IEEE International Workshop on Integrated Power Packaging (IWIPP). 2025. ed. 2025. (Proceedings of the IEEE International Workshop on Integrated Power Packaging, IWIPP).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Magnetic measurement quantities. / Popovic Renella, Dragana; Kamrani, Sara; Prediger, Maren S. et al.
Sensor Trends 2030 Engineering our future: Study by AMA Association for Sensors and Measurement in cooperation with VDI. VDI Verein Deutscher Ingenieure e.V., 2025. p. 31-35.

Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Transfer

Development of Glass-Based Atomchip. / Pöpsel, Frederik; Kassner, Alexander; Heinz, Jannis Ben et al.
2025. 62 - 63 Paper presented at 37th European Conference on Solid-State Transducers Eurosensors 2025, Eurosensors 2025, Wroclaw, Poland.

Research output: Contribution to conference › Paper › Research › peer review

High-Sensitive Chromium Strain Gauges on Steel Surfaces. / Ottermann, Rico; Steppeler, Tobias; Wurz, Marc.
2025. 89-90 Paper presented at Sensor and Measurement Science International (SMSI 2025), Nürnberg, Bavaria, Germany.

Research output: Contribution to conference › Paper › Research

Thin-film sensors on thrust bearing washers for temperature measurement directly in the mechanical rolling contact. / Steppeler, Tobias; Konopka, Dennis; Ottermann, Rico et al.
2025. 205 - 206 Paper presented at Sensor and Measurement Science International (SMSI 2025), Nürnberg, Bavaria, Germany.

Research output: Contribution to conference › Paper › Research

Simulation of Corrosion Effects in Conductive Yarns. / Weide-Zaage, Kisten; Ma, Xiaoli; Poepsel, Frederik et al.
2024 International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles (E-Textiles). Berlin, 2024. p. 307-311.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Compensation of strain gauge signal changes due to position-based internal changes in sensory linear guides. / Denkena, Berend; Buhl, Henning; Kowalke, Dennis et al.
ICPE2024: The 20th International Conference on Precision Engineering. 2024.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Polymer-Free Batch Production and Application of Metal Foil-Based Thin-Film Strain Gauges. / Ottermann, Rico; Müller, Eileen; Keßler, Marvin et al.
2024 IEEE Sensors, SENSORS 2024 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2024. (Proceedings of IEEE Sensors).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Design of a smart test rig demonstrator combining novel sensor-integrating machine elements. / Konopka, Dennis; Steppeler, Tobias; Ottermann, Rico et al.
2024.

Research output: Contribution to conference › Poster › Research

Miniaturized Rubidium Source for Generating Vapor Phase Atoms for Magneto Optical Traps. / Koch, Jannik; Diekmann, Leonard Frank; Kassner, Alexander et al.
2024 37th International Vacuum Nanoelectronics Conference, IVNC 2024. Institute of Electrical and Electronics Engineers Inc., 2024. (International Vacuum Nanoelectronics Conference).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Design and Manufacture of Face Grinding Wheels with Micro-Structured Channels. / Steinhoff, Lukas; Tubbe, Emma; Dencker, Folke et al.
24th International Conference of the European Society for Precision Engineering and Nanotechnology 2024. Proceedings. euspen, 2024.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Entwicklung einer Messelektronik zur Zustandsüberwachung von Wälzlagern mittels Integration von Dünnfilmsensoren. / Steppeler, Tobias; Siemßen, Hendrik; Ottermann, Rico et al.
2024. Paper presented at Dresdner Maschinenelemente Kolloquium, Dresden, Germany.

Research output: Contribution to conference › Paper › Research

Thermally Sprayed Coatings for Dynamic Magnetic Data Storage. / Nicolaus, Martin; Arndt, Matthias; Wurz, Marc et al.
Thermal Spray 2024: Proceedings from the International Thermal Spray Conference. 2024. p. 34-39 itsc2024p0034.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Field emission current-voltage characteristics of field emitters fabricated by wafer dicing. / Buchta, Aleksandra Monika; Kassner, Alexander; Dencker, Folke et al.
Book of abstracts for the EQTC 2023. ed. / Axel Schnitger; Rebecca Hausemann; Tara Liebisch. Hannover, 2024. p. 93.

Research output: Chapter in book/report/conference proceeding › Conference abstract › Research › peer review

Modification of glass by a laser for the use in micro-electric systems and quantum devices. / Keinert, Lauritz; Koch, Jannik (Contributor); Künzler, Christoph (Contributor) et al.
Book of abstracts for the EQTC 2023. ed. / Axel Schnitger; Rebecca Husemann; Tara Liebisch. Hannover: Institutionelles Repositorium Leibniz Universität Hannover, 2024. p. 91.

Research output: Chapter in book/report/conference proceeding › Conference abstract › Research

Femtosecond Laser Written Waveguides in CVD Diamonds. / Perevoznik, D.; Locmelis, J.; Zuber, D. et al.
2024. Paper presented at 2024 Conference on Lasers and Electro-Optics/Pacific Rim, CLEO-PR 2024, Incheon, Korea, Republic of.

Research output: Contribution to conference › Paper › Research › peer review

Glass-Extraction Electrode for Field Emission Applications. / Buchta, Aleksandra M.; Kassner, Alexander; Dencker, Folke et al.
2024 37th International Vacuum Nanoelectronics Conference (IVNC). 2024. (International Vacuum Nanoelectronics Conference proceedings).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Manufacturing and Characterization of Planar Transformers as Molded Interconnect Device Technology Component for an Industrial Production. / Bierwirth, Tim Nils; Bengsch, Sebastian; Werner, Michael et al.
Proceedings - IEEE 74th Electronic Components and Technology Conference, ECTC 2024. Institute of Electrical and Electronics Engineers Inc., 2024. p. 2172-2177 (Proceedings - Electronic Components and Technology Conference).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Push-Button Rotational Energy Harvester for Wireless Sensor Nodes. / Adamscheck, Marco; Wurz, Marc Christopher; Klaas, Daniel.
EASS 2024: Energieautonome Sensorsysteme 2024 - 12. GMM-Fachtagung. VDE Verlag GmbH, 2024. p. 57-59 (GMM-Fachberichte; Vol. 109).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Silicon-based membrane pressure sensor for inline monitoring of pressure and hermeticity of small-volume bonded packages. / Koch, Jannik; Brinkmann, Levin Marten; Kassner, Alexander et al.
2024 IEEE 74th Electronic Components and Technology Conference : (ECTC). Institute of Electrical and Electronics Engineers Inc., 2024. p. 193-200 (Proceedings - Electronic Components and Technology Conference).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Manufacturing of a Reluctance Actuator for Use as a Hearing Implant in the Middle Ear. / Müller, Eileen; Adamscheck, Marco; Fischer, Eike Christian et al.
MikroSystemTechnik Kongress 2023 - Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen: Nachhaltigkeit und Technologiesouveranitat, Proceedings. Berlin: VDE Verlag GmbH, 2023. p. 89-92.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Direct-Deposited Thin-film Strain Gauges for High-temperature Applications. / Ottermann, Rico; Kyoushi, Niklas; Wurz, Marc.
MikroSystemTechnik Kongress 2023: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat. 2023. p. 802-805.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Fabrication Method and Characterization of Molded Interconnect Device Micro Transformer in Planar Form by Embedding Sintered Ferrite Cores. / Bierwirth, Tim N.; Fischer, Eike C.; Prediger, Maren S. et al.
MikroSystemTechnik Kongress 2023: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat, Proceedings. VDE Verlag GmbH, 2023. p. 599-604.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Direct Sensor Integration on the Raceway of Roller Bearings. / Pape, Florian; Konopka, Dennis; Coors, Timm et al.
Gesellschaft für Tribologie e.V. (GfT), 2023. 9 p.

Research output: Book/Report › Conference proceeding › Research

Novel Glass-Silicon Emitter Chip for Field Emission Applications. / Buchta, Aleksandra M.; Kassner, Alexander; Voß, Julia et al.
2023 IEEE 36th International Vacuum Nanoelectronics Conference (IVNC). IEEE, 2023. p. 207-209 ( International Vacuum Nanoelectronics Conference).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors. / Christ, M.; Stiekel, A.; Stölmacker, C. et al.
International Conference on Space Optics, ICSO 2022. ed. / Kyriaki Minoglou; Nikos Karafolas; Bruno Cugny. SPIE, 2023. 1277718 (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 12777).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Influence of Microscale Tin Particles on Mechanical Properties of Silver Sintering Joints with Reduced Processing Parameters. / Hadeler, Steffen; Long, Yangyang; Ottermann, Rico et al.
2023 IEEE 73rd Electronic Components and Technology Conference (ECTC): Proceedings. Institute of Electrical and Electronics Engineers Inc., 2023. p. 676-681 (Proceedings - Electronic Components Conference).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Monitoring of the Flange Draw-In During Deep Drawing Processes Using a Thin-Film Inductive Sensor. / Fünfkirchler, T.; Arndt, M.; Hübner, S. et al.
Lecture Notes in Production Engineering. Springer Nature, 2023. p. 111-121 (Lecture Notes in Production Engineering; Vol. Part F1163).

Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

Advancements in monitoring of tribological stress in bearings using thin-film strain gauges. / Konopka, Dennis; Steppeler, Tobias; Ottermann, Rico et al.
2023. 1623-1634 Paper presented at 10th ECCOMAS Thematic Conference on Smart Structures and Materials.

Research output: Contribution to conference › Paper › Research › peer review

Development and Characterization of transferable Thin Film Sensor Technology on Carbon Fibre reinforced Plastics. / Hadeler, Steffen; Vogt, Fabian; Wurz, Marc Christopher.
MikroSystemTechnik Kongress 2023 - Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat, Proceedings. VDE Verlag GmbH, 2023. p. 113-116.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Force sensing linear rolling guides based on modified metal strain gauges. / Denkena, Berend; Klemme, Heinrich; Kowalke, Dennis et al.
European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023. ed. / O. Riemer; C. Nisbet; D. Phillips. euspen, 2023. p. 207-210 (European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 23rd International Conference and Exhibition, EUSPEN 2023).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Influence of oxide layers on the mechanical properties of copper. / Raumel, Selina; Wolf, Anna-Marleen; Dencker, Folke et al.
Tagungsband, 5. Symposium Materialtechnik : Fortschrittbericht der Materialforschung und Werkstofftechnik . Clausthaler Zentrum für Materialtechnik, 2023. p. 149-159 (Fortschrittsberichte der Materialforschung und Werkstofftechnik; Vol. 12).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Integration of film-based sensor technology in additively manufactured components. / Basten, Robin G.; Bengsch, Sebastian; Wurz, Marc C.
MikroSystemTechnik Kongress 2023 - Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat, Proceedings. VDE Verlag GmbH, 2023. p. 154-161.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Manufacture and application of a sensor inlet for high-temperature measurements in the frictional zone of an extrusion die. / Raumel, Selina; Moradi, Amirreza; Wurz, Marc C.
MikroSystemTechnik Kongress 2023 - Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat, Proceedings. VDE Verlag GmbH, 2023. p. 672-675.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Manufacturing and Characterization of Piezoelectric Force Sensor Arrays for Investigation of Ultrasonic Wire Bonding. / Arndt, Matthias; Long, Yangyang; Hu, Chengyan et al.
MikroSystemTechnik Kongress 2023 - Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat, Proceedings. VDE Verlag GmbH, 2023. p. 462-465.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Measurement of the Ultrasound Induced Temperature Change in an Ultrasonic Assisted Silver Sintering Process. / Hadeler, Steffen; Long, Yangyang; Twiefel, Jens et al.
IEEE Sensors 2023 Conference Proceedings. IEEE, 2023. (Proceedings of IEEE Sensors).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Microtechnological Production of Integrated Optical Gratings Using Laser Beam Lithography for Atomic Interferometers. / de Wall, Sascha; Kassner, Alexander; Dencker, Folke et al.
Tagungsband MikroSystemTechnik Kongress 2023. 2023.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Miniaturized quantum systems for inertial measurement units. / Kassner, A.; Diekmann, L.; Künzler, C. et al.
2023 DGON Inertial Sensors and Systems (ISS). ed. / Peter Hecker. IEEE, 2023. (International Symposium on Inertial Sensors and Systems).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Performance Comparison of MR Sensors on Silicon and Bare PEEK (Polyether Ether Ketone) Wafers. / de Wall, Sascha; Bierwirth, Tim Nils; Wurz, Marc et al.
2023. Poster session presented at Technology Congress 2023, Dresden, Saxony, Germany.

Research output: Contribution to conference › Poster › Research

Physical Sensors: Magnetic Sensors. / Prediger, Maren Susanne; Wurz, Marc.
Encyclopedia of Sensors and Biosensors. Vol. 1 Elsevier Inc., 2023. p. 97-110.

Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research

Sensor Inserts on Spherical Surfaces for Temperature Measurement in Wear Contacts. / Raumel, Selina; Wurz, Marc Christopher.
2023 IEEE SENSORS. IEEE, 2023. p. 1-4 (Proceedings of IEEE Sensors).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Setup of an ultra-high vacuum bonder for the encapsulation of quantum systems. / Droese, Niklas; Petring, Julian; Hadeler, Steffen et al.
MikroSystemTechnik Kongress 2023 - Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat, Proceedings. VDE Verlag GmbH, 2023. p. 763-766.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Simulation-based Design of a Magnetostrictive Middle Ear Actuator. / Adamscheck, Marco; Fischer, Eike; Müller, Eileen et al.
MikroSystemTechnik Kongress 2023 - Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Nachhaltigkeit und Technologiesouveranitat, Proceedings. VDE Verlag GmbH, 2023. p. 503-508.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Simulation, Manufacturing and Evaluation of a Transformer Eddy-Current Sensor for Deep-Drawing Processes. / Kamrani, Sara; Ottermann, Rico; Dencker, Folke et al.
SMSI 2023. AMA Association for Sensors and Measurement , 2023. p. 284 -285.

Research output: Chapter in book/report/conference proceeding › Other contribution in a book, report, anthology or conference proceeding › Research

Development and investigation of tin coatings for increased bone cement detachment at implant interfaces. / Prediger, Maren S.; Müller, Eileen; Reulbach, Magnus et al.
2022. Poster session presented at 1st International SIIRI Symposium, Hannover, Lower Saxony, Germany.

Research output: Contribution to conference › Poster › Research

Characterization of an anti-wear coating for the application of highly loaded smart thin-film sensors. / Konopka, Dennis; Pape, Florian; Ottermann, Rico et al.
BALTTRIB' 2022: proceedings of 11th international conference. 2022. p. 39-49.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Fabrication of a Low Profile Planar Transformer Using Molded Interconnect Device Technology. / Bierwirth, Tim Nils; Dencker, Folke; Fischer, Eike Christian et al.
2022 IEEE 9th Electronics System-Integration Technology Conference, ESTC 2022 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2022. p. 129-133.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Approaches for a Solely Electroless Metallization of Through-Glass Vias. / Zawacka, Aleksandra Monika; Prediger, Maren Susanne; Kassner, Alexander et al.
2022 IEEE 72nd Electronic Components and Technology Conference (ECTC). IEEE, 2022. p. 889-897 (Proceedings - Electronic Components and Technology Conference; Vol. 2022-May).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

In Situ Resistance Trimming of Directly Deposited Thin-Film Strain Gauges. / Ottermann, Rico; Zhang, Shuowen; Denkena, Berend et al.
2022 IEEE Sensors, SENSORS 2022 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2022. (Proceedings of IEEE Sensors; Vol. 2022-October).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Production and characterisation of batch manufactured flexible micro-grinding tools for finishing metallic surfaces. / Steinhoff, Lukas; Dencker, Folke; Wurz, Marc Christopher.
European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 22nd International Conference and Exhibition, EUSPEN 2022. ed. / Richard K. Leach; A. Akrofi-Ayesu; C. Nisbet; Dishi Phillips. euspen, 2022. p. 77-80 (European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 22nd International Conference and Exhibition, EUSPEN 2022).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Investigation of tribologically relevant surface layers formed on non-ferrous metals in oxygen-free conditions. / Raumel, Selina; Dencker, Folke; Wurz, Marc.
2021. Abstract from European Symposium on Friction, Wear and Wear Protection .

Research output: Contribution to conference › Abstract › Research

Anisotropic Magneto-Resistive Sensor Effect based Sensor using Daisy Chain on Polyether Ether Ketone Substrate. / De Wall, Sascha; Bengsch, Sebastian; Fischer, Eike et al.
2021 IEEE Sensors. Institute of Electrical and Electronics Engineers Inc., 2021. (Proceedings of IEEE Sensors; Vol. 2021-October).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Combination of Additive and Thin-Film Technological Manufacturing for the Realization of a Pressure Sensor for Biomedical Applications. / Prediger, Maren S.; Müller, Eileen; Bengsch, Sebastian et al.
MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings. VDE Verlag GmbH, 2021. p. 578-581 (MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Development of a Polyimid Membrane for Electromagnetic Middle-Ear Actuators. / Glukhovskoy, Anatoly; Müller, Eileen; Prediger, Maren S. et al.
MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings. VDE Verlag GmbH, 2021. p. 186-189 (MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Directly Deposited Thin-Film Strain Gauges on Curved Metallic Surfaces. / Ottermann, Rico; Klaas, Daniel; Dencker, Folke et al.
2021 IEEE Sensors, SENSORS 2021 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2021. (Proceedings of IEEE Sensors; Vol. 2021-October).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Direktabgeschiedene Dünnfilm-Dehnungsmessstreifen für erhöhte Temperaturen. / Ottermann, Rico; Klaas, Daniel; Dencker, Folke Enno et al.
MikroSystemTechnik Kongress 2021: Proceedings. Berlin: VDE Verlag GmbH, 2021. p. 315-316.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Direktabgeschiedene Dünnfilmsensorik mithilfe einer neuartigen Beschichtungsanlage. / Ottermann, Rico; Klaas, Daniel; Dencker, Folke Enno et al.
27. NDVaK-Kolloquium. Dresden, 2021.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Fabrication of a Low Profile Planar Transformer Using a Dual PCB Approach. / Fischer, Eike Christian; Bierwirth, Tim Nils; Dencker, Folke et al.
MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings. VDE Verlag GmbH, 2021. p. 483-486 (MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research

Film transfer from thin films to metal surfaces using sol-gels, self-assembling monolayers and water glass. / Basten, R.G.; Zawacka, A.M.; Bengsch, S. et al.
MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings. VDE Verlag GmbH, 2021. p. 27-30.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Investigations on Silver Sintering using an Ultrasonic Transient Liquid Phase Sintering Process. / Hadeler, Steffen; Seefisch, Henning; Ottermann, Rico et al.
2021 IEEE 23rd Electronics Packaging Technology Conference (EPTC). Institute of Electrical and Electronics Engineers Inc., 2021. p. 288-291.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Mikrotechnologische Fertigung von integrierten optischen Gittern mittels Lift-Off-Prozess für den Einsatz in Atominterferometern. / de Wall, S.; Kassner, A.; Dencker, F. et al.
MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings. VDE Verlag GmbH, 2021. p. 466-468 (MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Proof of Concept: Glass-Membrane Based Differential Pressure Sensor. / Glukhovskoy, Anatoly; Prediger, Maren Susanne; Schäfer, Jennifer et al.
2021 IEEE 71st Electronic Components and Technology Conference (ECTC). IEEE, 2021. p. 1563-1570 (Proceedings - Electronic Components and Technology Conference; Vol. 2021-June).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Simulationsgestützte Auslegung und Fertigung von piezoelektrischen Kraftsensor-Arrays zur Untersuchung des Ultraschall-Drahtbondprozesses. / Arndt, Matthias; Wurz, Marc Christopher; Dencker, Folke et al.
MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings. VDE Verlag GmbH, 2021. p. 742-745 (MikroSystemTechnik Kongress 2021: Mikroelektronik, Mikrosystemtechnik und ihre Anwendungen - Innovative Produkte fur zukunftsfahige Markte, Proceedings).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Direct Deposition of Thin-Film Strain Gauges with a New Coating System for Elevated Temperatures. / Ottermann, Rico; Klaas, Daniel; Dencker, Folke et al.
IEEE Sensors, SENSORS 2020: Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2020. 9278661.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Giant Magneto-Resistive Effect based Sensor on Laser Direct Structured MID Substrates. / Fischer, Eike Christian; Bengsch, Sebastian; De Wall, Sascha et al.
Proceedings: IEEE 70th Electronic Components and Technology Conference, ECTC 2020. Institute of Electrical and Electronics Engineers Inc., 2020. p. 439-444 9159426 (Proceedings - Electronic Components and Technology Conference; Vol. 2020-June).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Mikrotechnologische Fertigung von integrierten optischen Gittern für den Einsatz in Atominterferometern. / de Wall, S.; Kassner, A.; Dencker, F. et al.
GMM-Fb. 97: Mikro-Nano-Integration. Berlin: VDE Verlag GmbH, 2020. p. 56-59 (GMM-Fachberichte).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Novel Piezoelectric Force Sensor Array for Investigation of Ultrasonic Wire Bonding. / Arndt, Matthias; Long, Yangyang; Dencker, Folke et al.
Proceedings: IEEE 70th Electronic Components and Technology Conference, ECTC 2020. Institute of Electrical and Electronics Engineers Inc., 2020. p. 276-283 9159495 (Proceedings - Electronic Components and Technology Conference; Vol. 2020-June).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Optical Platform for Highly Precise Optical Components. / Bengsch, Sebastian; Fischer, Eike; De Wall, Sascha et al.
Proceedings: IEEE 70th Electronic Components and Technology Conference, ECTC 2020. Institute of Electrical and Electronics Engineers Inc., 2020. p. 2191-2196 9159477 (Proceedings - Electronic Components and Technology Conference; Vol. 2020-June).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Passive and Active Thermal Management of Bonded Bare-Dice Laser Diodes on Polymer Foil Substrates. / Bengsch, Sebastian; Wurz, Marc Christopher.
2020 IEEE Photonics Conference, IPC 2020. Institute of Electrical and Electronics Engineers Inc., 2020. 9252383.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Selbstschärfende Mikroschleifwerkzeuge. / Asadi, Esmail; Hockauf, Rolf; Wurz, Marc Christopher.
Jahrbuch Schleifen, Honen, Läppen und Polieren. Essen: Vulkan-Verl, 2020.

Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review

Thin Film Transferring via PVA Substrate and Contacting of Sensor inside Elastomer Matrix. / Bengsch, Sebastian; Giese, Ulrich; Fischer, Eike et al.
IEEE Sensors, SENSORS 2020: Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2020. 9278876 (Proceedings of IEEE Sensors; Vol. 2020-October).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Novel Eddy-Current Sensor for Industrial Deep-Drawing Applications. / Arndt, Matthias; Dencker, Folke; Wurz, Marc Christopher.
2019 IEEE Sensors, SENSORS 2019: Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. 8956948 (Proceedings of IEEE Sensors; Vol. 2019-October).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Integrated Atomic Quantum Technologies in Demanding Environments:: Development and Qualification of Miniaturized Optical Setups and Integration Technologies for UHV and Space Operation. / Christ, M.; Kassner, Alexander; Smol, R. et al.
International Conference on Space Optics, ICSO 2018: Proceedings. ed. / Zoran Sodnik; Nikos Karafolas; Bruno Cugny. SPIE, 2019. 1118088 (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 11180).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Structuring of laser activated polymers for sensor applications. / Bengsch, Sebastian; Aue, Maximilian; Cromwell, Kevin et al.
IEEE 69th Electronic Components and Technology Conference (ECTC): Proceedings. Institute of Electrical and Electronics Engineers Inc., 2019. p. 1883-1888 8811368 (Proceedings - Electronic Components and Technology Conference; Vol. 2019-May).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

AMR-based mechanical pressure sensors: a proof of concept. / Prediger, Maren S.; Rechel, Mathias; Wurz, Marc Christopher.
2019. Paper presented at 15th International Symposium Magnetoresistive Sensors and Magnetic Systems, Germany.

Research output: Contribution to conference › Paper › Research

AMR Sensoren auf flexiblem substrat zur Messung von Verformungen eines hartmagnetischen Partikel-Elastomerverbunds. / Prediger, Maren S.; Wittek, Christian Gabriel R.; Owiss, Ghadeer et al.
MikroSystemTechnik Kongress 2019: Mikroelektronik | MEMS-MOEMS | Systemintegration - Saulen der Digitalisierung und kunstlichen Intelligenz, Proceedings. 1. ed. VDE Verlag GmbH, 2019. p. 111-114.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Atomchips mit integrierten optischen Gittern zur Erzeugung von Bose-Einstein-Kondensaten. / Kassner, Alexander; Dencker, Folke; Künzler, Christoph et al.
MikroSystemTechnik Kongress 2019: Mikroelektronik | MEMS-MOEMS | Systemintegration - Saulen der Digitalisierung und kunstlichen Intelligenz, Proceedings. VDE Verlag GmbH, 2019. p. 541-544.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Atom chip technology for use under UHV conditions. / Kassner, Alexander; Rechel, Mathias; Heine, Hendrik et al.
Smart Systems Integration 2019: International Conference and Exhibition on Integration Issues of Miniaturized Systems, SSI 2019. ed. / T. Otto. VDE Verlag GmbH, 2019. p. 69-75.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Elektrische Kontaktierung bauteilinhärenter Dehnungsmesssensorik mithilfe des Transient Liquid Phase (TLP) Bonding. / Ottermann, Rico; Knöpke, Rolf; Wurz, Marc Christopher.
MikroSystemTechnik Kongress 2019: Mikroelektronik | MEMS-MOEMS | Systemintegration - Saulen der Digitalisierung und kunstlichen Intelligenz, Proceedings. VDE Verlag GmbH, 2019. p. 263-266.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Fertigung und Charakterisierung von in Leiterplatten integrierten Mikrotransformatoren. / Fischer, Eike; Cromwell, Kevin; Wurz, Marc.
MikroSystemTechnik Kongress 2019: Mikroelektronik | MEMS-MOEMS | Systemintegration - Saulen der Digitalisierung und kunstlichen Intelligenz, Proceedings. VDE Verlag GmbH, 2019. p. 569-572.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

MEMS basierte magnetische passive Mikrobauteile für Hochfrequenz-Leistungsanwendungen. / Dinulovic, Dragan; Shousha, Mahmoud; El Shafey, K. et al.
MikroSystemTechnik Kongress 2019: Mikroelektronik | MEMS-MOEMS | Systemintegration - Saulen der Digitalisierung und kunstlichen Intelligenz, Proceedings. VDE Verlag GmbH, 2019. p. 32-35.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Simulationsgestützte Auslegung und Fertigung von werkzeugintegrierten induktiven Sensoren. / Arndt, Matthias; Dencker, Folke; Wurz, Marc Christopher.
MikroSystemTechnik Kongress 2019: Mikroelektronik | MEMS-MOEMS | Systemintegration - Saulen der Digitalisierung und kunstlichen Intelligenz, Proceedings. VDE Verlag GmbH, 2019. p. 673-676.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

The concept of a large working stroke reluctance zipper actuator. / Glukhovskoy, Anatoly; Wurz, Marc Christopher.
MikroSystemTechnik Kongress 2019: Mikroelektronik | MEMS-MOEMS | Systemintegration - Saulen der Digitalisierung und kunstlichen Intelligenz, Proceedings. VDE Verlag GmbH, 2019. p. 506-509.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Vibro-tactile displays for stimulating surface impressions. / Schmelt, Andreas Seabstian; Fischer, Eike Christian; Hofmann, Viktor et al.
Proceedings of the 23rd International Congress on Acoustics: Integrating 4th EAA Euroregio 2019. ed. / Martin Ochmann; Michael Vorländer; Janina Fels. International Commission for Acoustics (ICA), 2019. p. 1000-1007 (Proceedings of the International Congress on Acoustics; Vol. 2019-September).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Flexible mono- and multilayer micro grinding tools for ultra-high precision processing and micro machining. / Asadi, Esmail; Hockauf, Rolf; Denkena, Berend et al.
European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018. ed. / O. Riemer; Enrico Savio; D. Billington; R. K. Leach; D. Phillips. euspen, 2018. p. 151-152 (European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Concept for Using MID Technology for Advanced Packaging. / Wurz, Marc Christopher; Roesener, Bernd; Bengsch, Sebastian et al.
Proceedings: IEEE 68th Electronic Components and Technology Conference, ECTC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 932-939 8429656 (Proceedings - Electronic Components and Technology Conference; Vol. 2018-May).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Structuring methods of polymers for low cost sensor manufacturing. / Bengsch, Sebastian; Wurz, Marc Christopher; Aue, Maximilian et al.
Proceedings: IEEE 68th Electronic Components and Technology Conference, ECTC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 1396-1401 8429726 (Proceedings - Electronic Components and Technology Conference; Vol. 2018-May).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Manufacturing and characterization of asymmetric evanescent field polished couplers for grating assisted mode selective fiber coupling. / Schlangen, Sebastian; Bremer, Kort; Zheng, Yulong et al.
Micro-Structured and Specialty Optical Fibres V. SPIE, 2018. 1068116 (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 10681).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Mode-selective polished fiber couplers based on fiber gratings. / Schlangen, Sebastian; Bremer, Kort; Isaak, Andreas et al.
Optical Fiber Communication Conference, OFC 2018. OSA - The Optical Society, 2018. (Optics InfoBase Conference Papers; Vol. Part F84-OFC 2018).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Fabrication and characterization of high-speed PZT sensors for the investigation of ultrasonic wire bonding process. / Isaak, Andreas; Long, Yangyang; Asadi, Esmail et al.
Proceedings of the 18 international conference of the european society for precision engineering and nanotechnology. ed. / O. Riemer; Enrico Savio; D. Billington; R. K. Leach; D. Phillips. euspen, 2018. p. 163-164.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

A laser-based, in-line chlorine dioxide concentration sensor. / Wurz, Marc Christopher; Fischer, Eike Christian; Holz, Stephanie et al.
2018. Paper presented at AST - Symposium on Automated Systems and Technologies 2018.

Research output: Contribution to conference › Paper › Research

Next Generation Atom Chip Development. / Wurz, Marc Christopher; Papakonstantinou, Alexandros; Heine, Hendrik et al.
2018. Paper presented at DPG-Frühjahrstagungen 2018, Germany.

Research output: Contribution to conference › Paper › Research

Solid state joint actuator for a vibro tactile line display. / Schmelt, Andreas; Fischer, Eike Christian; Wurz, Marc et al.
ACTUATOR 2018: 16th International Conference and Exhibition on New Actuators and Drive Systems, Conference Proceedings. VDE Verlag GmbH, 2018. p. 284-287.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Analysis of the Wire/Substrate Interface during Ultrasonic Bonding Process. / Long, Yangyang; Dencker, Folke; Isaak, Andreas et al.
2017 IEEE CPMT Symposium Japan (ICSJ). Institute of Electrical and Electronics Engineers Inc., 2017. p. 203-206.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Nanosecond miniature transmitters for pulsed optical radars. / Filimonov, Alexey V.; Zemlyakov, Valery E.; Egorkin, Vladimir I. et al.
Internet of Things, Smart Spaces, and Next Generation Networks and Systems - 17th International Conference, NEW2AN 2017, 10th Conference, ruSMART 2017, 3rd Workshop NsCC 2017, Proceedings. Springer Verlag, 2017. p. 490-497 (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); Vol. 10531 LNCS).

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

A micromechanical gyroscope with bistable suspension of microdrive. / Pyatishev, E.; Enns, Y.; Komarevtsev, I. et al.
2017 24th Saint Petersburg International Conference on Integrated Navigation Systems, ICINS 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2017. 7995646.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Visualization of oxide removal during ultrasonic wire bonding process. / Long, Yangyang; Dencker, Folke; Isaak, Andreas et al.
2017 IEEE 19th Electronics Packaging Technology Conference, EPTC 2017. Institute of Electrical and Electronics Engineers Inc., 2017. p. 1-4.

Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review

Patents

First 1

Verfahren zur Herstellung von Diamantspitzen. / Dencker, Folke (Inventor); Wurz, Marc Christopher (Inventor); Maier, Hans Jürgen (Inventor).
Deutsches Patent- und Markenamt (DPMA). Patent No.: DE102019213043A1. Mar 04, 2021.

Research output: Patent

Sensorbauteil, Halbzeug, Verfahren zur Anbringung und zur Herstellung eines Sensorbauteils. / Dencker, Folke (Inventor); Wurz, Marc Christopher (Inventor); Maier, Hans Jürgen (Inventor) et al.
Deutsches Patent- und Markenamt (DPMA). Patent No.: DE102019122623A1. Feb 25, 2021.

Research output: Patent

Verfahren und Vorrichtung zum bestimmen einer Konzentration. / Wurz, Marc Christopher (Inventor); Glukhovskoy, Anatoly (Inventor); Schnebeck, Thorsten (Inventor) et al.
Europäisches Patentamt (EPA). Patent No.: EP3746773A1. Dec 09, 2020.

Research output: Patent

Verfahren zur Herstellung eines Formkörpers und Bauteil mit elektrischer Funktionalität. / Maier, Hans Jürgen (Inventor); Wurz, Marc Christopher (Inventor); Bengsch, Sebastian (Inventor).
Deutsches Patent- und Markenamt (DPMA). Patent No.: DE102019113973A1. Nov 26, 2020.

Research output: Patent

Magnetkopf, Verfahren zur Speicherung von Information sowie Erzeugnis. / Rechel, Mathias (Inventor); Taptimthong, Piriya (Inventor); Wurz, Marc Christopher (Inventor).
Deutsches Patent- und Markenamt (DPMA). Patent No.: DE102018116896A1. Jan 16, 2020.

Research output: Patent

Einrichtung mit einem elektrischen Bauteil sowie Verfahren zu deren Herstellung. / Maier, Hans Jürgen (Inventor); Wurz, Marc Christopher (Inventor); Bengsch, Sebastian (Inventor) et al.
Europäisches Patentamt (EPA). Patent No.: EP3817929A1. Jan 09, 2020.

Research output: Patent

Herstellung induktiver elektrischer Bauelemente. / Wurz, Marc Christopher (Inventor); Maier, Hans Jürgen (Inventor); Beringer, Sebastian (Inventor).
Leibniz Universität Hannover. Patent No.: DE102017124675A1. Apr 25, 2019.

Research output: Patent

Elektrische Schaltungsstruktur und Verfahren zu deren Herstellung. / Maier, Hans Jürgen (Inventor); Wurz, Marc (Inventor); Beringer, Sebastian (Inventor).
Deutsches Patent- und Markenamt (DPMA). Patent No.: DE102017108437A1. Oct 25, 2018.

Research output: Patent

Verfahren und Anlage zur Herstellung eines elektrischen Bauteils sowie Computerprogramm. / Klaas, Daniel (Inventor); Wurz, Marc Christopher (Inventor); Maier, Hans Jürgen (Inventor).
Patent No.: DE102017113212. Oct 11, 2018.

Research output: Patent

Verfahren zur Anbringung einer elektrischen Mikrostruktur sowie Elastomerstruktur, Faserverbundbauteil und Reifen. / Maier, Hans Jürgen (Inventor); Wurz, Marc (Inventor); Bengsch, Sebastian (Inventor).
Patent No.: DE102016123795A1. Jun 14, 2018.

Research output: Patent

Verfahren zum Verbinden eines Halbleiterbauelements mit einem Gegenstück sowie Anordnung mit einem Halbleiterbauelement. / Wurz, Marc Christopher (Inventor); Overmeyer, Ludger (Inventor); von Witzendorff, Philipp (Inventor) et al.
Deutsches Patent- und Markenamt (DPMA). Patent No.: DE102016123180A1. May 30, 2018.

Research output: Patent

Beschichtungseinrichtung zum zumindest teilweisen Beschichten einer Oberfläche. / Wurz, Marc (Inventor); Rissing, Lutz (Inventor); Bach, Friedrich Wilhelm (Inventor) et al.
Patent No.: DE102014004323. Oct 01, 2015.

Research output: Patent

Elektrisch betriebener Raucherartikel, Plattform dafür und Verfahren zu dessen Herstellung. / Rissing, Lutz (Inventor); Wurz, Marc Christopher (Inventor); Rissing, Lutz (Inventor) et al.
Patent No.: DE102014102442. Aug 27, 2015.

Research output: Patent

Elektronisches Bauteil. / Rissing, Lutz (Inventor); Wurz, Marc Christopher (Inventor); Kaiser, Mathias (Inventor).
Patent No.: DE102013013464. Feb 19, 2015.

Research output: Patent

VERFAHREN ZUM HERSTELLEN EINES HERMETISCH ABGESCHLOSSENEN GEHÄUSES. / Wurz, Marc, Christopher (Inventor); Rissing, Lutz (Inventor); Zimmermann, Stefan (Inventor) et al.
Patent No.: WO2014023320. Feb 13, 2014.

Research output: Patent

MAGNETFELD-MESSANORDNUNG. / Wurz, Marc, Christopher (Inventor); Chen, Jue (Inventor); Rissing, Lutz (Inventor).
Patent No.: WO2012116933. Sept 07, 2012.

Research output: Patent

Miscellaneous

First 1

Sensoren richtig positioniert. / Denkena, Berend; Klemme, Heinrich; Kowalke, Dennis et al.
In: Konstruktion und Entwicklung, Vol. 2023, No. 6, 07.11.2023, p. 42-45.

Research output: Contribution to specialist publication › Contribution in popular science journal › Transfer

Werkzeugmaschinen werden intelligent. / Klaproth, Markus Sebastian; Denkena, Berend; Bergmann, Benjamin et al.
In: Werkzeugmaschinen, 27.10.2021.

Research output: Contribution to specialist publication › Contribution in non-scientific journal › Transfer

Verbundname: Brandfrüherkennung mit einem neuartigen Ionen-Mobilitäts-Spektrometer mit nicht-radioaktiver Quelle zur Verbesserung der Sicherheit: Akronym: Brandi : Teilvorhaben: Grundlagenuntersuchungen zu Teilkomponenten nicht-radioaktiver Mikro-Elektronen-Quellen, Erforschung von Aufbau- und Verbindungstechniken für nichtradioaktive Mikroelektronenquellen für ein Ionen-Mobilitäts-Spektrometer : Schlussbericht zur Bekanntmachung KMU-innovativ: Forschung für die zivile Sicherheit. / Kusch, Alexander; Rissing, Lutz; Wurz, Marc Christopher.
37 p. Hannover: Leibniz Universität Hannover, Institut für Mikroproduktionstechnik. 2016.

Research output: Other contribution › Other publication › Research › peer review

Studium Initiale: Übergangsmanagement und Integration beruflich Qualifizierter in das Hochschulstudium : Schlussbericht des Teilvorhabens der Gottfried Wilhelm Leibniz Universität Hannover zum Verbundprojekt Mobilitätswirtschaft : Bund-Länder-Wettbewerb: "Aufstieg durch Bildung: Offene Hochschulen" : 1. Wettbewerbsrunde, erste Förderphase vom 01.10.2011-31.03.2015 = Final report of the undertakings of the Gottfried Wilhelm Leibniz Universität Hannover in the scope of the joint research project: "Mobility management STUDIUM INITIALE - Transition management and integration of qualified professionals in the university education". / Billmann-Mahecha, Elfriede; Beyersdorf, Martin; Rissing, Lutz et al.
Hannover: Leibniz Universität Hannover. 2015.

Research output: Other contribution › Other publication › Research › peer review

Rotational broadband energy-harvesting-unit based on a combination of piezo – and magnetoelectrics. / Kleyman, Gleb; Twiefel, Jens; Wurz, Marc C.
Hannover. 2013.

Research output: Other contribution › Other publication › Research › peer review

Fertigung eines magneto-optischen Schreib-/Lesekopfes. / Wurz, Marc Christopher.
Garbsen: PZH, Produktionstechn. Zentrum, 2010.

Research output: Thesis › Doctoral thesis